Product Details
The Foxboro P0931RQ, also cataloged as the P0931RQ Cordset Cable, operates as a dedicated hardware component for high-speed data transfer and Fieldbus Module interconnectivity within Foxboro I/A Series control networks. It routes digital signals between DIN FBM devices and system backplane interfaces via a 24 AWG shielded conductor path.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | P0931RQ |
| Brand | Foxboro |
| Origin | USA |
| Weight | Approx. 0.35 lbs |
| Dimensions | Cable length 2 meters |
| Operating Temp | -40 deg C to +85 deg C |
| Power Consumption | Passive physical conductor path |
| Voltage Rating | 300 V |
| Data Rate | Up to 1 Gbps |
| Conductor Size | 24 AWG |
| Jacket Material | Polyurethane |
| Shielding Type | Foil and braid double shielding |
| Connector Type | DIN FBM |
Fieldbus Transmission Integrity and Channel Isolation
The Foxboro P0931RQ utilizes dual-layer foil and braid shielding to prevent electromagnetic interference from degrading high-speed serial data signals transmitted up to 1 Gbps. By maintaining continuous ground shield continuity across DIN FBM interconnect points, the assembly provides channel-to-channel isolation and suppresses ground loop transients. This configuration protects low-level 4-20 mA HART analog digital pass-through signals from adjacent high-voltage power lines.
Frequently Asked Questions
Q: What is the minimum bend radius required during cable routing?
A: To prevent damage to the inner 24 AWG conductors and preserve shield braid density, maintain a minimum dynamic bend radius of at least 10 times the outer cable diameter during installation.
Q: Can the P0931RQ cordset be connected or disconnected while system backplanes are powered?
A: Hot-swapping the DIN FBM connector is permitted if the associated I/O rack hardware supports live insertion. However, care must be taken to ensure the metallic shield collar contacts the chassis ground ring first to discharge static potentials.
Field Installation Guidelines
Route the polyurethane-jacketed cable through dedicated low-voltage instrument trays, keeping a minimum clearance of 300 mm from 480 VAC or higher AC power conduits to minimize noise coupling.
Ensure the DIN FBM connectors are fully seated into the mating module receptacles until locking latches engage completely. Terminate the overall foil and braid shield drain wire to the cabinet single-point ground bar. When passing through enclosure walls, utilize appropriate cable glands and maintain a minimum 5-thread engagement for NPT conduit entries to ensure IP-rated environmental sealing.
Additional Information
- 100% Genuine Parts: All products are original and authentic, ensuring reliable industrial performance.
- 30-Day Refund Guarantee: Return any in-stock item within 30 days in original, unopened packaging for a full refund (excluding shipping and fees).
- 12-Month Warranty: Covers defects in materials or workmanship; excludes misuse, normal wear, or unauthorized modifications.
- Worldwide Shipping: We ship via USPS, UPS, FedEx, and DHL. Delivery times vary by country and may be subject to customs or import fees.
- Support & Contact: Technical and warranty assistance is available anytime. Contact us here: Contact.
- Purchase Guidance: Check product specifications and compatibility carefully before ordering to ensure proper application.
Tech & Buying Guide
Marshalling Cabinet Preventive Maintenance: Essential Healthiness Checks for PLC, DCS, and ESD Systems
Marshalling cabinets serve as the vital interface between field instrumentation and control room electronics in modern process facilities. Regular preventive maintenance of these cabinets ensures signal integrity across programmable logic controllers (PLCs), distributed control systems (DCS), and emergency shutdown (ESD) networks. System technicians must execute structured inspection protocols to mitigate environmental risks, identify loose wiring, and maintain continuous operational readiness.
Spatial Computing in Industrial Automation: Elevating PLC and DCS Operations with AR and VR
Industry 4.0 integrates digital intelligence into field operations, transforming factory automation landscapes worldwide. Spatial technologies—specifically Augmented Reality (AR) and Virtual Reality (VR)—redefine how engineers interact with industrial control systems. By bridging computer-generated CAD models with real-time operational technology (OT) data, immersive displays enable intuitive monitoring, rapid diagnostics, and safer maintenance across complex processing facilities.
Master Acceptance Testing: Understanding FAT and SAT in Industrial Control Systems
Factory Acceptance Testing (FAT) and Site Acceptance Testing (SAT) serve as critical quality assurance gateways in complex industrial control systems. Both procedures verify that programmable logic controllers (PLCs), distributed control systems (DCS), and associated field devices meet strict functional specifications. However, executing these tests effectively requires clear delineation between off-site staging and final field commissioning.