Product Details
Configured for non-contact measurement of radial and axial shaft dynamic displacement, position, and speed in rotating machinery, the Emerson EPRO PR6424/000-010 (PR6424/000-010 Eddy Current Sensor) provides direct physical signal execution. This 16 mm diameter transducer detects shaft surface impedance variations to deliver high-resolution displacement data for real-time monitoring and predictive maintenance diagnostics.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | PR6424/000-010 |
| Brand | Emerson (EPRO) |
| Origin | Subject to certificate of origin |
| Weight | ~200 grams (Sensor & cable) |
| Dimensions | M18 x 1.5 sleeve thread |
| Operating Temp | -35 deg C to +150 deg C |
| Power Consumption | Dependent on interface converter |
| Measurement Range | Static +/- 2.0 mm |
| Sensitivity | 4 V/mm (101.6 mV/mil) |
| Protection Class | Industrial grade |
Eddy-Current Probe Scaling and Rotor Dynamics
The measurement accuracy of the Emerson EPRO PR6424/000-010 is governed by the electromagnetic interaction between the 16 mm sensor tip and the 42 Cr Mo4 ferromagnetic shaft target. To ensure valid output signals, the transducer must be commissioned at the nominal air gap of 2.7 mm. Consistent gap voltage validation is required to ensure operation within the linear range of the probe, as deviations from target metallurgy or diameter (minimum 80 mm requirement) will result in sensitivity errors. Proper installation must mitigate rotor dynamics effects, with cross-talk suppression achieved by maintaining sufficient separation distance from adjacent inductive sensors to prevent interference with the carrier frequency.
Frequently Asked Questions
Q: Is the 5-meter cable assembly field-repairable if damaged?
A: No, the cable and transducer are matched at the factory to maintain specific impedance characteristics. Replacing the cable or shortening it will shift the resonance frequency, necessitating factory-level recalibration.
Q: Can the sensor head withstand exposure to high-pressure fluids?
A: Yes, the sensor head is pressure-rated to 10,000 hPa (145 psi). Exceeding this pressure limit risks compromising the hermetic seal of the PEEK sensor tip and internal coil assembly.
Q: How does the sensor handle high surface speeds during operation?
A: The sensor maintains linearity up to a maximum surface speed of 2,500 m/s. Ensure that the shaft surface quality meets API 670 standards to prevent electrical run-out or noise in the dynamic output.
Field Installation Guidelines
- Mounting: Utilize the M18 x 1.5 threaded sleeve for installation into a rigid machine housing bracket. Ensure a minimum of 5 full thread engagements to maintain mechanical stability under vibration.
- Shielding: Protect the sensor cable from high-voltage transients by routing through dedicated grounded metallic conduit. Terminate the shield at the monitoring system's instrument ground rail.
- Gap Setting: Use a non-magnetic feeler gauge to establish the 2.7 mm nominal air gap. Verify output voltage against the system's specification sheet before final tightening of the lock nuts.
- Environment: Prevent cable kinking and ensure the Lemo connector is shielded from liquid ingress in accordance with the application's environmental requirements.
Additional Information
- 100% Genuine Parts: All products are original and authentic, ensuring reliable industrial performance.
- 30-Day Refund Guarantee: Return any in-stock item within 30 days in original, unopened packaging for a full refund (excluding shipping and fees).
- 12-Month Warranty: Covers defects in materials or workmanship; excludes misuse, normal wear, or unauthorized modifications.
- Worldwide Shipping: We ship via USPS, UPS, FedEx, and DHL. Delivery times vary by country and may be subject to customs or import fees.
- Support & Contact: Technical and warranty assistance is available anytime. Contact us here: Contact.
- Purchase Guidance: Check product specifications and compatibility carefully before ordering to ensure proper application.
Tech & Buying Guide
Why 24V DC Power Supplies Standardize Modern Industrial Automation
Industrial control cabinets worldwide rely on 24V DC as the universal power standard for field instrumentation, sensors, and controllers. Walk into any manufacturing plant, and you will find PLCs, human-machine interfaces (HMIs), and smart actuators running on extra-low voltage DC. Standardizing on 24V DC enhances operational safety, lowers cabinet footprint, and maintains steady control performance across factory networks.
Essential Motion Control Commands: A Practical Guide for Engineers
Automation engineers often rely on precise position and speed control to drive modern factory machinery. Modern industrial systems, such as Programmable Logic Controllers (PLCs) and Distributed Control Systems (DCS), depend heavily on standardized motion instructions. Mastering these commands ensures operational safety, protects mechanical components, and optimizes cycle times across production lines.
Mastering Modern Industrial Joystick Controls in Heavy Automation
Industrial joysticks play a pivotal role in human-machine interaction across heavy material handling and mobile hydraulics. These tactile controllers translate complex operator movements into precise electrical signals for PLCs, motion controllers, and DCS networks. Consequently, selecting and installing the right joystick architecture ensures operator safety, reduces fatigue, and optimizes equipment performance.