Product Details
The GE IS215UCVEH2A, also cataloged as the IS215UCVEH2A VME Controller Card, operates as a dedicated hardware component for central processing and system-level control logic within Mark VI Speedtronic control platforms.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | IS215UCVEH2A |
| Brand | General Electric |
| Origin | USA |
| Weight | 2 lbs |
| Dimensions | 8.26 cm x 4.19 cm |
| Operating Temp | -30 deg C to 65 deg C |
| Power Consumption | +5 VDC (6 A typical, 8 A max) |
| Processor | Intel Celeron 300 MHz |
| Memory | 32 MB DRAM |
Profinet / EtherNet/IP Deterministic Networks
The IS215UCVEH2A functions as the primary compute module, managing backplane bus communication velocity to ensure deterministic execution of Boolean control algorithms. The module utilizes an integrated 10BaseT/100BaseTX Ethernet interface for UDH connectivity, supporting precise timing synchronization across the distributed control rack. Firmware flash compatibility is strictly enforced via the system toolbox configuration, which validates internal software against physically present hardware during the boot sequence. I/O density scaling is handled through the VME bus master architecture, allowing the controller to interface with multiple rack-mounted I/O modules while maintaining consistent sub-millisecond scan times.
Frequently Asked Questions
Q: Does the IS215UCVEH2A support hot-swapping within the VME rack?
A: No. Any extraction or insertion of the controller card requires the rack power to be de-energized to prevent damage to the backplane communication pins and internal microprocessor circuitry.
Q: How does the controller handle configuration validation?
A: Upon every power-up, the controller initiates a handshake protocol to validate the hardware ID and configuration mapped within the system toolbox. Any discrepancy between the configured logic and detected hardware will prevent the system from entering an operational run state.
Field Installation Guidelines
- Mounting: Carefully guide the IS215UCVEH2A into the designated single-slot VME chassis position. Ensure that the backplane connector is seated fully to provide stable +5 VDC power delivery.
- Connectivity: Connect the RJ-45 Ethernet cable to the primary port for UDH communication. Verify that the cable is shielded and routed away from high-voltage power leads to maintain signal integrity.
- Environment: Maintain the cabinet ambient temperature between -30 deg C and 65 deg C. Ensure the rack cooling fans are fully functional to prevent thermal throttling of the 300 MHz Intel Celeron processor.
- Configuration: Utilize the system toolbox to define the network subnet and IP logical addresses. Ensure the secondary port configurations (if used) are correctly mapped to prevent network IP conflicts.
- Verification: Monitor the controller status LEDs after power-on. A successful boot sequence is indicated by the completion of the hardware-to-software configuration validation routine.
Additional Information
- 100% Genuine Parts: All products are original and authentic, ensuring reliable industrial performance.
- 30-Day Refund Guarantee: Return any in-stock item within 30 days in original, unopened packaging for a full refund (excluding shipping and fees).
- 12-Month Warranty: Covers defects in materials or workmanship; excludes misuse, normal wear, or unauthorized modifications.
- Worldwide Shipping: We ship via USPS, UPS, FedEx, and DHL. Delivery times vary by country and may be subject to customs or import fees.
- Support & Contact: Technical and warranty assistance is available anytime. Contact us here: Contact.
- Purchase Guidance: Check product specifications and compatibility carefully before ordering to ensure proper application.
Tech & Buying Guide
Choosing the Right Controller: PLC vs. Motion Controller in Industrial Automation
Selecting the optimal control architecture is a foundational decision in industrial automation. Engineers must frequently choose between a Programmable Logic Controller (PLC) and a dedicated Motion Controller. While both systems manage machinery, their underlying design philosophies differ significantly, impacting performance, scalability, and system integration.
Mastering PLC Power Supply Architectures and Operating Voltages
Selecting the correct operating voltage is a critical step in designing reliable industrial automation systems. Whether you are working with a compact PLC or a large-scale DCS, your power architecture dictates the system's longevity. In this guide, we explore the standard voltage ranges and power distribution strategies required to maintain stable factory automation operations.
Optimizing Power Supply Sizing for Industrial Automation Systems
The power supply is the silent heartbeat of any industrial automation system. While engineers often prioritize processors and communication protocols, a stable power architecture remains the most critical factor for long-term reliability. In my 15 years of experience, I have found that neglecting power supply sizing often leads to ghost errors, intermittent field device failures, and costly production downtime.