Product Details
Configured for high-density signal acquisition in M1 automation platforms, the Bachmann DI232 (DI232 Digital Input Module) provides direct physical/electrical execution of digital sensor monitoring and interrupt triggering.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | DI232 |
| Brand | Bachmann |
| Origin | Austria |
| Weight | 0.25 kg (approx.) |
| Dimensions | 102 mm x 12 mm x 130 mm |
| Operating Temp | 0 deg C to 60 deg C |
| Power Consumption | 2.0 W (typical) |
| Input Channels | 32 |
| Input Logic | Current-sinking (EN 61132 Type 1) |
| Signal Threshold | > 2 mA |
Profinet / EtherNet/IP Deterministic Networks
The DI232 integrates into the M1 rack backplane to facilitate deterministic data exchange between field sensors and the controller CPU. The module architecture supports efficient I/O density scaling, allowing for high-channel-count sensor integration without compromising system bus throughput. Firmware flash compatibility is supported, ensuring that the interrupt handling and debounce logic remain synchronized with the platform-specific I/O drivers. The backplane bus communication velocity is optimized to ensure that time-critical interrupt signals, configurable on specific channels, are processed with minimal latency, supporting real-time event-driven tasks.
Frequently Asked Questions
Q: Are the input channels galvanically isolated from the M1 system backplane?
A: Yes, all input channels feature galvanic isolation to protect the system electronics from common-mode electrical noise and ground potential differences.
Q: Can the DI232 be configured for source-mode logic?
A: No, the standard DI232 model is limited to current-sinking logic inputs (EN 61132 Type 1). Source-mode configuration requires the DI232/np1 variant.
Q: Is hot-swapping supported for this module?
A: The DI232 does not support live hot-swapping. System power must be disconnected before installation or extraction to prevent damage to the backplane bus interface.
Field Installation Guidelines
- Wiring: Use shielded twisted-pair cabling for all digital inputs. Connect the cable shield to the cabinet functional earth (FE) point to reduce noise susceptibility.
- Voltage Levels: Ensure input supply is maintained at the nominal 24 VDC. Deviations outside the standard range may result in unreliable signal state detection.
- Interrupt Routing: When utilizing inputs 1 and 2 as interrupt triggers, minimize the cable length to reduce signal propagation delay and susceptibility to electromagnetic interference.
- Environment: Maintain the module in a clean, dry environment to ensure proper operation of the status indication LEDs and connector contact points.
Additional Information
- 100% Genuine Parts: All products are original and authentic, ensuring reliable industrial performance.
- 30-Day Refund Guarantee: Return any in-stock item within 30 days in original, unopened packaging for a full refund (excluding shipping and fees).
- 12-Month Warranty: Covers defects in materials or workmanship; excludes misuse, normal wear, or unauthorized modifications.
- Worldwide Shipping: We ship via USPS, UPS, FedEx, and DHL. Delivery times vary by country and may be subject to customs or import fees.
- Support & Contact: Technical and warranty assistance is available anytime. Contact us here: Contact.
- Purchase Guidance: Check product specifications and compatibility carefully before ordering to ensure proper application.
Tech & Buying Guide
Hub vs Switch vs Router in Industrial Automation Architecture
Modern factory automation relies on reliable industrial networking infrastructure to exchange real-time field data across operational technology systems. Engineers often encounter networking hardware like hubs, switches, and routers when integrating Programmable Logic Controllers, Distributed Control Systems, and SCADA monitoring nodes. Although these devices share physical ports, they operate at different layers of the Open Systems Interconnection reference model and deliver distinct traffic management capabilities.
Marshalling Cabinet Preventive Maintenance: Essential Healthiness Checks for PLC, DCS, and ESD Systems
Marshalling cabinets serve as the vital interface between field instrumentation and control room electronics in modern process facilities. Regular preventive maintenance of these cabinets ensures signal integrity across programmable logic controllers (PLCs), distributed control systems (DCS), and emergency shutdown (ESD) networks. System technicians must execute structured inspection protocols to mitigate environmental risks, identify loose wiring, and maintain continuous operational readiness.
Spatial Computing in Industrial Automation: Elevating PLC and DCS Operations with AR and VR
Industry 4.0 integrates digital intelligence into field operations, transforming factory automation landscapes worldwide. Spatial technologies—specifically Augmented Reality (AR) and Virtual Reality (VR)—redefine how engineers interact with industrial control systems. By bridging computer-generated CAD models with real-time operational technology (OT) data, immersive displays enable intuitive monitoring, rapid diagnostics, and safer maintenance across complex processing facilities.