Product Details
The GE IS215UCVEH2A, also cataloged as the IS215UCVEH2A VME Controller Card, operates as a dedicated hardware component for central processing and system-level control logic within Mark VI Speedtronic control platforms.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | IS215UCVEH2A |
| Brand | General Electric |
| Origin | USA |
| Weight | 2 lbs |
| Dimensions | 8.26 cm x 4.19 cm |
| Operating Temp | -30 deg C to 65 deg C |
| Power Consumption | +5 VDC (6 A typical, 8 A max) |
| Processor | Intel Celeron 300 MHz |
| Memory | 32 MB DRAM |
Profinet / EtherNet/IP Deterministic Networks
The IS215UCVEH2A functions as the primary compute module, managing backplane bus communication velocity to ensure deterministic execution of Boolean control algorithms. The module utilizes an integrated 10BaseT/100BaseTX Ethernet interface for UDH connectivity, supporting precise timing synchronization across the distributed control rack. Firmware flash compatibility is strictly enforced via the system toolbox configuration, which validates internal software against physically present hardware during the boot sequence. I/O density scaling is handled through the VME bus master architecture, allowing the controller to interface with multiple rack-mounted I/O modules while maintaining consistent sub-millisecond scan times.
Frequently Asked Questions
Q: Does the IS215UCVEH2A support hot-swapping within the VME rack?
A: No. Any extraction or insertion of the controller card requires the rack power to be de-energized to prevent damage to the backplane communication pins and internal microprocessor circuitry.
Q: How does the controller handle configuration validation?
A: Upon every power-up, the controller initiates a handshake protocol to validate the hardware ID and configuration mapped within the system toolbox. Any discrepancy between the configured logic and detected hardware will prevent the system from entering an operational run state.
Field Installation Guidelines
- Mounting: Carefully guide the IS215UCVEH2A into the designated single-slot VME chassis position. Ensure that the backplane connector is seated fully to provide stable +5 VDC power delivery.
- Connectivity: Connect the RJ-45 Ethernet cable to the primary port for UDH communication. Verify that the cable is shielded and routed away from high-voltage power leads to maintain signal integrity.
- Environment: Maintain the cabinet ambient temperature between -30 deg C and 65 deg C. Ensure the rack cooling fans are fully functional to prevent thermal throttling of the 300 MHz Intel Celeron processor.
- Configuration: Utilize the system toolbox to define the network subnet and IP logical addresses. Ensure the secondary port configurations (if used) are correctly mapped to prevent network IP conflicts.
- Verification: Monitor the controller status LEDs after power-on. A successful boot sequence is indicated by the completion of the hardware-to-software configuration validation routine.
Additional Information
- 100% Genuine Parts: All products are original and authentic, ensuring reliable industrial performance.
- 30-Day Refund Guarantee: Return any in-stock item within 30 days in original, unopened packaging for a full refund (excluding shipping and fees).
- 12-Month Warranty: Covers defects in materials or workmanship; excludes misuse, normal wear, or unauthorized modifications.
- Worldwide Shipping: We ship via USPS, UPS, FedEx, and DHL. Delivery times vary by country and may be subject to customs or import fees.
- Support & Contact: Technical and warranty assistance is available anytime. Contact us here: Contact.
- Purchase Guidance: Check product specifications and compatibility carefully before ordering to ensure proper application.
Tech & Buying Guide
Navigating Industrial Communication Protocols: A Technical Guide for Modern PLCs
In the realm of industrial automation, the Programmable Logic Controller (PLC) serves as the brain of the factory floor. However, its true power is unlocked through robust communication protocols. These digital pathways ensure seamless data exchange between controllers, sensors, and enterprise-level management systems.
Understanding PLC Digital Output Electronic Architectures: Relay, Transistor, and Triac Specifications
Selecting the correct electronic switching interface represents a critical decision point when designing industrial automation control panels. While modern Programmable Logic Controllers (PLCs) handle complex internal binary logic smoothly, physical connections to field devices require distinct electrical hardware. This comprehensive technical guide analyzes the performance, limitations, and circuit architecture of relay, transistor, and triac digital outputs.
Advanced Loop Tuning: Mastering Proportional Control for Tank Level Systems in Siemens TIA Portal
Managing liquid levels within storage vessels represents a fundamental process loop challenge in modern industrial automation. While comprehensive Proportional-Integral-Derivative (PID) controllers handle highly volatile dynamics, a focused Proportional (P) controller offers an ideal, fast-acting alternative for specific hydraulic applications. This technical guide outlines the execution of proportional control loops utilizing the Siemens TIA Portal ecosystem.