Honeywell TC-FCCN01 ControlNet to FLEX I/O Gateway Interface Module

Product Description

The TC-FCCN01 acts as a high-speed communication bridge, facilitating the integration of decentralized FLEX I/O modules into a primary Honeywell ControlNet network. This non-redundant gateway adapter is engineered to translate complex control logic into field-side execution with deterministic performance. It allows for the expansion of I/O capacity without requiring additional local controllers, making it a cost-effective solution for distributed process control. The module features an integrated 3-digit LED diagnostic display, providing real-time status updates and error codes to assist maintenance personnel in rapid troubleshooting.

Technical Specifications

• Model Identification: TC-FCCN01

• Primary Function: ControlNet Gateway / Adapter for FLEX I/O

• Communication Throughput: 5 Mbit/s (Standard ControlNet Speed)

• Expansion Capacity: Support for up to 8 distributed FLEX I/O modules

• Operating Supply Voltage: 24VDC (Nominal)

• Diagnostic Interface: 3-digit LED status indicator

• Installation Hardware: Compatible with 35mm DIN rail or direct panel mounting

• Operational Temperature Range: -20°C to +80°C

• Physical Dimensions: 87 mm x 94 mm x 69 mm

• Net Weight: 2.72 kg (approx. 6.00 lbs)

Deployment Architecture

The TC-FCCN01 is typically installed in remote junction boxes or secondary control cabinets where field-level wiring is concentrated. By utilizing the 5 Mbit/s ControlNet protocol, this gateway ensures that digital and analog data from up to eight I/O modules is transmitted back to the central controller with minimal latency. Its broad operating temperature range (up to 80°C) allows for deployment in harsh industrial environments where standard networking hardware might fail due to thermal stress.

Frequently Asked Questions

• Does this module support media redundancy?

  The TC-FCCN01 is a non-redundant gateway module. For applications requiring dual-cable media redundancy, a dedicated redundant-capable adapter should be utilized.

• How are node addresses configured on this unit?

  The ControlNet node address is typically set via hardware switches on the module or through the 3-digit LED display interface, allowing for unique identification within the network segment.