Product Details
The Foxboro P0916FH, also cataloged as the P0916FH Cable Assembly, operates as a dedicated hardware component for interconnecting fieldbus modules and termination assemblies within Foxboro I/A Series system racks. Configured as a 1 meter Type 4 terminal cable, it provides point-to-point wiring between FBM2xx series I/O modules and external field termination blocks to route analog and digital signals.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | P0916FH |
| Brand | Foxboro |
| Origin | USA |
| Weight | 1.36 kg (3.00 lbs) |
| Dimensions | 1 meter length |
| Operating Temp | -20 deg C to +70 deg C |
| Power Consumption | Passive wiring assembly (0 W) |
| Cable Type | Type 4 Terminal Cable |
| Compatibility | FBM2xx Series Modules |
| Conductor Interface | Multi-pin system connector |
Channel-to-Channel Isolation and Loop Protocol Connectivity
The Foxboro P0916FH terminal cable retains internal conductor shielding and twisted-pair routing to prevent crosstalk between adjacent I/O channels. Integrated drain wires and galvanic isolation boundaries maintain signal accuracy across 4-20 mA HART loop protocol instruments and prevent cold junction compensation (CJC) thermal offset drift when routing temperature sensor field connections.
Frequently Asked Questions
Q: Which Foxboro modules are compatible with the P0916FH terminal cable?
A: The P0916FH is designed for direct interface with Foxboro FBM2xx series fieldbus modules and corresponding termination bases.
Q: Does the P0916FH cable support hot-swapping of connected FBM modules?
A: Yes, provided the connected FBM2xx module and baseplate support online insertion and removal, the cable connection remains static during module replacement.
Field Installation Guidelines
Ensure all power feeds to the targeted I/O baseplate are disconnected prior to installing or removing the P0916FH cable assembly. Inspect male and female pin assignments on both ends to verify alignment before mating connectors.
Press the multi-pin connectors firmly into the FBM2xx baseplate and termination assembly receptacles until side retention latches click into place. Maintain minimum bend radiuses along the 1 meter cable run within cabinet wire ducts, keeping signal wiring separated from high-voltage AC circuits. Fasten cable shield drain wires directly to the enclosure single-point ground bar. Where field cabling enters through conduit, verify that all NPT threaded entries maintain at least 5 full threads of engagement.
Additional Information
- 100% Genuine Parts: All products are original and authentic, ensuring reliable industrial performance.
- 30-Day Refund Guarantee: Return any in-stock item within 30 days in original, unopened packaging for a full refund (excluding shipping and fees).
- 12-Month Warranty: Covers defects in materials or workmanship; excludes misuse, normal wear, or unauthorized modifications.
- Worldwide Shipping: We ship via USPS, UPS, FedEx, and DHL. Delivery times vary by country and may be subject to customs or import fees.
- Support & Contact: Technical and warranty assistance is available anytime. Contact us here: Contact.
- Purchase Guidance: Check product specifications and compatibility carefully before ordering to ensure proper application.
Tech & Buying Guide
Managed Switch vs. Unmanaged Switch: Industrial Ethernet Architecture
Hot Standby vs. Cold Standby Redundancy in Industrial Automation
System availability determines process safety and productivity in industrial automation. Control engineers deploy redundancy to eliminate single points of failure. This technical guide evaluates Hot Standby vs. Cold Standby architectures, comparing failover speeds, memory sync, cost trade-offs, and field selection criteria.
