Product Details
The ABB CCF10 2MBPS, also cataloged as the CCF 10 Coupling Module, operates as a dedicated hardware component for protocol conversion and serial data transmission within ABB control and automation networks. The unit manages physical layer signal coupling over a Modbus interface at speeds up to 2 Mbps, facilitating high-speed data frame transfer between controller racks and remote field devices.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | CCF 10 2MBPS (Product ID: EXC788713-2) |
| Brand | ABB |
| Product Type | Communication Modules |
| Communication Interface | Modbus Interface |
| Baud Rate | Up to 2 Mbps |
| Net Weight | 1.2 kg |
| Gross Weight | 1.2 kg |
| Operating Temp | 0 to +60 deg C (standard panel ambient) |
| Power Consumption | Powered via backplane bus connection |
Backplane Bus Communication Velocity and Firmware Flash Compatibility
The coupling module integrates directly with the system rack backplane, leveraging high backplane bus communication velocity to route Modbus registers without introducing transmission latencies. Inter-module communication frames sync deterministically with external Profinet or EtherNet/IP deterministic networks through host gateway processors. Onboard firmware flash compatibility ensures stable register mapping and parity bit synchronization across various system firmware revisions.
Frequently Asked Questions
Q: Does the CCF10 module require dedicated external power wiring?
A: No, operating power is drawn directly through the rack backplane connector when properly seated in the subrack chassis.
Q: What transmission rate is supported on the Modbus communication link?
A: The module supports data transfer rates up to 2 Mbps over the dedicated Modbus interface.
Field Installation Guidelines
- Module Slot Insertion: Align the CCF10 circuit board with the guide rails of the chassis rack and push firmly until the backplane connector fully seats.
- Fastening: Hand-tighten top and bottom panel retaining screws to secure mechanical alignment and establish chassis earth ground.
- Cable Termination: Ensure RS-485/Modbus serial lines utilize proper end-of-line termination resistors to suppress transmission line reflections at 2 Mbps signaling rates.
- Shield Grounding: Connect communication cable drain wires to the designated panel earth terminal to prevent high-frequency noise interference.
Additional Information
- 100% Genuine Parts: All products are original and authentic, ensuring reliable industrial performance.
- 30-Day Refund Guarantee: Return any in-stock item within 30 days in original, unopened packaging for a full refund (excluding shipping and fees).
- 12-Month Warranty: Covers defects in materials or workmanship; excludes misuse, normal wear, or unauthorized modifications.
- Worldwide Shipping: We ship via USPS, UPS, FedEx, and DHL. Delivery times vary by country and may be subject to customs or import fees.
- Support & Contact: Technical and warranty assistance is available anytime. Contact us here: Contact.
- Purchase Guidance: Check product specifications and compatibility carefully before ordering to ensure proper application.
Tech & Buying Guide
Redefining Control Systems: The Rise of Flexible I/O Modules in Industrial Automation
Conventional input-output architectures often limit engineering agility and inflate long-term inventory costs. Today, Flexible Input/Output Modules (FIOM) are transforming how control system engineers design, commission, and maintain automation infrastructure. By allowing individual channel software configuration, FIOM technology bridges the gap between rigid hardware design and dynamic plant requirements.
Understanding Modern SCADA Systems: Architecture, Communication Topologies, and Industrial Applications
Supervisory Control and Data Acquisition (SCADA) systems form the digital backbone of modern industrial automation. They collect critical field data, transmit signals across vast distances, and empower plant operators with real-time process visibility. Across modern infrastructures, SCADA solutions streamline centralized control and maintain continuous operational uptime.
Understanding OPC Servers in Modern Industrial Automation: Principles, Architecture, and Applications
In industrial automation, connecting physical hardware with high-level software remains a primary operational challenge. Factories utilize programmable logic controllers (PLCs), distributed control systems (DCS), human-machine interfaces (HMIs), and smart sensors from diverse vendors. These devices often speak different proprietary protocols. Open Platform Communications (OPC) servers solve this interoperability challenge by standardizing how data flows across factory networks.