Product Details
The Honeywell 51305482-205, also cataloged as the 51305482-205 TPNB LAN B Cable, operates as a dedicated hardware component for 100-BASE-T network applications within Experion PKS platforms.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | 51305482-205 |
| Brand | Honeywell |
| Origin | USA |
| Weight | 0.4 kg |
| Dimensions | 7 cm x 14 cm x 14.5 cm |
| Operating Temp | -20 to +60 deg C |
| Power Consumption | Passive cabling assembly (Voltage handling up to 30 VAC) |
| Cable Spec | CAT5e STP, 5 m length (+/-0.5% tolerance) |
| Conductor & Impedance | 24 AWG stranded copper, 100 ohm +/-15% |
| Signal Characteristics | DC resistance <= 9.38 ohm/100 m, capacitance <= 5.6 nF/100 m |
| Performance Metrics | Propagation delay <= 548 ns/100 m, delay skew <= 45 ns/100 m |
4-20 mA HART Loop & Channel-to-Channel Isolation Characteristics
Constructed with a shielded twisted-pair configuration, the assembly limits cross-talk and suppresses high-frequency electromagnetic interference along control bus pathways. Individual conductor pairs maintain low capacitance and uniform impedance, preserving channel-to-channel isolation when routed in parallel with 4-20 mA HART loop wiring harnesses. Controlled delay skew and low signal attenuation ensure deterministic frame delivery across local Ethernet nodes without degrading adjacent process I/O data channels.
Frequently Asked Questions
Q: Can the 51305482-205 cable be hot-swapped while the local node is operational?
A: Yes, physical hot-swap disconnection is supported, though network logic should account for temporary loss of LAN B communication during swapping.
Q: What is the maximum operating voltage limit for this signal cable?
A: The conductor and connector insulation rating allows signal voltage handling up to a maximum limit of 30 VAC.
Q: Does the shielding design require grounding at both ends of the run?
A: To prevent ground loop currents while maintaining noise suppression, connect the shield drain to the primary grounding terminal designated by the system panel topology.
Field Installation Guidelines
- Verify that the cable run length does not exceed the maximum allowed channel distance for 100-BASE-T network segments.
- Maintain a minimum bend radius to prevent mechanical deformation of the internal 24 AWG stranded copper pairs.
- Route LAN cabling through separated wireways to minimize coupling from high-voltage AC power distribution.
- Insert RJ45 connectors into the network interface ports until the locking tabs fully seat with a firm click.
- Inspect the outer jacket for physical damage and verify proper shield termination to ground terminals before energizing the system.
Additional Information
- 100% Genuine Parts: All products are original and authentic, ensuring reliable industrial performance.
- 30-Day Refund Guarantee: Return any in-stock item within 30 days in original, unopened packaging for a full refund (excluding shipping and fees).
- 12-Month Warranty: Covers defects in materials or workmanship; excludes misuse, normal wear, or unauthorized modifications.
- Worldwide Shipping: We ship via USPS, UPS, FedEx, and DHL. Delivery times vary by country and may be subject to customs or import fees.
- Support & Contact: Technical and warranty assistance is available anytime. Contact us here: Contact.
- Purchase Guidance: Check product specifications and compatibility carefully before ordering to ensure proper application.
Tech & Buying Guide
PLC and DCS Control System Spares Strategy: Engineering Guidelines
Modern factory automation relies on high-speed fiber optic backbones to link distributed control systems across noise-intensive industrial environments. Unlike copper wiring, optical fibers transmit data via light pulses, making them completely immune to electromagnetic interference (EMI). Field engineers must master optical cable joining and fusion splicing techniques to guarantee low-loss data transmission across critical Programmable Logic Controller (PLC) and Distributed Control System (DCS) nodes.
PLC and DCS Control System Spares Strategy: Engineering Guidelines
Industrial automation lifecycle management requires robust spare parts planning for Programmable Logic Controller (PLC) and Distributed Control System (DCS) platforms. Plant engineers must correctly categorize spare components during front-end engineering design to maintain high system availability. Miscalculating spare requirements can lead to prolonged unscheduled downtime, project budget overruns, or delayed site commissioning.
Wellhead Control Panel (WHCP) Architecture in Oil and Gas Automation
Upstream oil and gas operations rely on specialized field control platforms to manage wellhead extraction safety and hydraulic actuation. A Wellhead Control Panel (WHCP) serves as a dedicated hydraulic and pneumatic power unit designed to operate critical Christmas Tree isolation valves. By interfacing field safety components directly with Programmable Logic Controller (PLC) architecture, a WHCP protects upstream extraction assets against overpressure, catastrophic leaks, and thermal emergencies.