Product Details
The ABB 35AB95 GJR5145600R0001, also cataloged as the 35AB95 Digital Output Module, operates as a dedicated hardware component for discrete field signal actuation and protocol routing within Procontic/Advant PLC architectures. The module executes direct binary control across 16 digital output channels while supporting high-speed bus interfaces up to 12 Mbps over PROFIBUS DP-V1 networks. Operating on a nominal 24 VDC external supply voltage, the unit maintains continuous signal processing within a compact enclosure measuring 125 x 100 x 75 mm and weighing 0.8 lbs.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | 35AB95 (GJR5145600R0001) |
| Base Model | 35AB95 |
| Brand | ABB |
| Origin | Sweden |
| Weight | 0.8 lbs |
| Dimensions | 125 x 100 x 75 mm |
| Operating Temp | 0 deg C to +55 deg C |
| Power Consumption | Standard Backplane Draw |
| Supply Voltage | 24 VDC |
| Digital Output Channels | 16 |
| Communication Protocol | PROFIBUS DP-V1 |
| Max Interface Speed | 12 Mbps |
Backplane Bus Communication Velocity and Deterministic Networks
The module integrates high-speed processing logic to maximize backplane bus communication velocity across adjacent PLC rack assemblies. Internal protocol handling enforces deterministic PROFIBUS DP-V1 frame updates up to 12 Mbps, mitigating cycle jitter during high I/O density scaling. Low-latency internal firmware flash compatibility ensures synchronized output state latching and predictable field actuator response during system execution.
Frequently Asked Questions
Q: What power supply parameters are required for the external output channel drive?
A: The module requires a regulated external power supply of 24 VDC. Power lines must be protected with fast-acting fuses to shield internal switching components against field-side overcurrent conditions.
Q: How should the PROFIBUS DP-V1 interface line be terminated?
A: When positioned at either physical end of a network segment operating up to 12 Mbps, active bus termination resistors must be enabled on the DB9/terminal connection to prevent signal reflection and data corruption.
Field Installation Guidelines
- Ensure cabinet power and rack backplane power are fully isolated prior to mounting or removing the module.
- Secure the housing firmly onto the mounting track or subrack, verifying that backplane bus pins mate cleanly without mechanical stress.
- Connect a dedicated ground strap from the enclosure frame directly to the main equipment earthing bus to ensure effective noise immunity.
- Maintain a minimum separation distance of 100 mm between low-voltage signal cabling and high-voltage AC power conductors inside cable ducting.
Additional Information
- 100% Genuine Parts: All products are original and authentic, ensuring reliable industrial performance.
- 30-Day Refund Guarantee: Return any in-stock item within 30 days in original, unopened packaging for a full refund (excluding shipping and fees).
- 12-Month Warranty: Covers defects in materials or workmanship; excludes misuse, normal wear, or unauthorized modifications.
- Worldwide Shipping: We ship via USPS, UPS, FedEx, and DHL. Delivery times vary by country and may be subject to customs or import fees.
- Support & Contact: Technical and warranty assistance is available anytime. Contact us here: Contact.
- Purchase Guidance: Check product specifications and compatibility carefully before ordering to ensure proper application.
Tech & Buying Guide
Master Acceptance Testing: Understanding FAT and SAT in Industrial Control Systems
Factory Acceptance Testing (FAT) and Site Acceptance Testing (SAT) serve as critical quality assurance gateways in complex industrial control systems. Both procedures verify that programmable logic controllers (PLCs), distributed control systems (DCS), and associated field devices meet strict functional specifications. However, executing these tests effectively requires clear delineation between off-site staging and final field commissioning.
Industrial Networking Essentials: Demystifying Hubs, Switches, and Routers in Control Systems
Industrial automation relies heavily on robust networking infrastructure to connect programmable logic controllers (PLCs), distributed control systems (DCS), and human-machine interfaces (HMIs). Modern factory automation environments generate vast amounts of real-time operational data across deterministic networks. Understanding the structural differences between hubs, switches, and routers ensures optimal traffic segmentation, minimizes latency, and maintains high network availability.
Safety Relays in Industrial Automation: Fundamentals, Design Standards, and Fail-Safe Architecture
Safety relays form the bedrock of functional safety in modern factory automation, preventing catastrophic equipment failure and protecting plant personnel. While standard electromechanical relays handle basic load switching, they lack the redundant diagnostics required for high-risk industrial environments. Modern industrial automation platforms—including programmable logic controllers (PLCs) and distributed control systems (DCS)—rely on specialized safety relays to monitor field devices and isolate hazards instantly.