Product Details
Configured for overcurrent protection in control circuit branches, the Allen-Bradley 1492-SPM1C030 (1492-SPM1C030 Supplementary Protector) provides direct physical/electrical execution of single-pole circuit interruption under overload and short-circuit conditions.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | 1492-SPM1C030 |
| Brand | Allen-Bradley |
| Origin | USA |
| Weight | 0.11 kg |
| Dimensions | Not Specified |
| Operating Temp | Not Specified |
| Power Consumption | Not Applicable |
| Current Rating | 3 A |
| Voltage Rating | 48 VDC / 277 VAC |
| Trip Curve | C-Curve |
Profinet / EtherNet/IP Deterministic Networks
The 1492-SPM1C030 utilizes a thermal-magnetic trip unit to provide instantaneous response to fault events. This protector is designed for mounting within standard control enclosures where I/O density scaling necessitates individual branch circuit isolation. While this device serves as a mechanical circuit protection component, its operation is governed by standard electrical coordination protocols. Users must ensure the protector is matched to the load requirements and that the upstream fault current does not exceed the device's rated breaking capacity. Firmware flash compatibility and deterministic network diagnostics are handled by secondary monitoring devices where status feedback is required for supervisory logic.
Frequently Asked Questions
Q: Can this 1-pole protector be used for motor branch circuit protection?
A: No. The 1492-SPM1C030 is categorized as a supplementary protector and is intended for protection of control circuits and instrumentation. It does not meet the requirements for a UL-listed branch circuit protector intended for direct motor branch circuit protection.
Q: Does the C-curve trip characteristic allow for inrush current?
A: Yes. The C-curve is specifically designed for general-purpose applications with moderate inrush currents. It allows for higher transient currents during the initial energization phase without causing nuisance tripping, while maintaining tight protection against sustained overloads and short circuits.
Field Installation Guidelines
- Mount the protector onto a standard 35 mm DIN rail; ensure the mounting latch is fully seated to provide mechanical stability.
- Observe the designated line and load terminal orientations; incoming power should be connected to the upper terminals.
- Utilize copper conductors sized according to the 3 A continuous current rating to prevent excessive heat generation at the termination points.
- Separate the protected control circuit wiring from high-voltage power lines or variable frequency drive cables to mitigate electromagnetic noise.
- Apply the correct tightening torque to the clamp terminals as specified in the technical manual to ensure a low-impedance electrical path.
- Perform a continuity test upon completion of wiring to verify that the circuit is correctly established and that the breaker is functional in the "ON" position.
Additional Information
- 100% Genuine Parts: All products are original and authentic, ensuring reliable industrial performance.
- 30-Day Refund Guarantee: Return any in-stock item within 30 days in original, unopened packaging for a full refund (excluding shipping and fees).
- 12-Month Warranty: Covers defects in materials or workmanship; excludes misuse, normal wear, or unauthorized modifications.
- Worldwide Shipping: We ship via USPS, UPS, FedEx, and DHL. Delivery times vary by country and may be subject to customs or import fees.
- Support & Contact: Technical and warranty assistance is available anytime. Contact us here: Contact.
- Purchase Guidance: Check product specifications and compatibility carefully before ordering to ensure proper application.
Tech & Buying Guide
Understanding Types of Noise in Electronic Circuits and Control Systems
Signal integrity directly determines measurement accuracy and loop stability across industrial automation environments. Electronic noise introduces unwanted stochastic interference into analog loops, sensor feedback lines, and digital fieldbus networks. Understanding how intrinsic electronic noise and external electromagnetic interference manifest allows control engineers to optimize signal conditioning and shield sensitive instrumentation effectively.
Why 24V DC Power Supplies Standardize Modern Industrial Automation
Industrial control cabinets worldwide rely on 24V DC as the universal power standard for field instrumentation, sensors, and controllers. Walk into any manufacturing plant, and you will find PLCs, human-machine interfaces (HMIs), and smart actuators running on extra-low voltage DC. Standardizing on 24V DC enhances operational safety, lowers cabinet footprint, and maintains steady control performance across factory networks.
Essential Motion Control Commands: A Practical Guide for Engineers
Automation engineers often rely on precise position and speed control to drive modern factory machinery. Modern industrial systems, such as Programmable Logic Controllers (PLCs) and Distributed Control Systems (DCS), depend heavily on standardized motion instructions. Mastering these commands ensures operational safety, protects mechanical components, and optimizes cycle times across production lines.