Product Details
Configured for combustion monitoring in burner management systems, the Honeywell LG1093AA04 (LG1093AA04 Ultraviolet Flame Sensor) provides direct physical execution of flame detection via UV spectroscopy. The sensor serves as the primary detection element utilized to execute rapid flame monitoring across industrial furnace and boiler platforms.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | LG1093AA04 |
| Brand | Honeywell |
| Operating Temp | -40 to 85 deg C |
| Power Consumption | 10 mA at 24 VDC |
| Detection Range | 0 to 762 mm |
| Response Time | < 10 ms |
| IP Rating | IP65 |
TSI Mechanical Monitoring and Signal Validation
The LG1093AA04 employs UV spectroscopy to isolate the specific spectral signatures emitted during combustion, facilitating high-speed flame discrimination. By maintaining a high sensitivity of 0.5 uA/mW, the sensor effectively filters out ambient light interference to ensure distinct flame state reporting. The internal circuitry utilizes cross-talk suppression to maintain signal integrity when multiple sensors are mounted in close proximity within a multi-burner array. The output stage provides a binary open/grounded signal, which must be validated against the controller's logic thresholds to confirm valid flame presence within the combustion chamber.
Frequently Asked Questions
Q: Can the LG1093AA04 be used in high-vibration environments?
A: Yes, the sensor is constructed for industrial service. However, ensure that the M12 connector is properly secured and that shielded cabling is used to prevent induced noise in the signal line, which could be misinterpreted as flame flicker or loss.
Q: Is the sensor output signal compatible with standard PLC digital input cards?
A: The sensor provides an open/grounded output. Verify that the input module is configured to match the voltage level and logic state (sink/source) of the sensor output to ensure correct detection of the flame/no-flame status.
Field Installation Guidelines
- Ensure the mounting position provides a direct line-of-sight to the flame root, within the 762 mm maximum detection range.
- Install the sensor using the provided M12 connector, ensuring the cable is routed away from high-voltage ignition sources to avoid EMI interference.
- Verify the IP65 seal by tightening the connector and inspecting the enclosure for debris or damage that could compromise environmental protection.
- Perform an initial flame-on/flame-off test to verify that the controller correctly maps the sensor's open/grounded signal transitions to the burner management logic.
- Periodically inspect the optical lens for soot accumulation, as surface fouling will reduce spectral sensitivity and may lead to false-negative flame loss indications.
Additional Information
- 100% Genuine Parts: All products are original and authentic, ensuring reliable industrial performance.
- 30-Day Refund Guarantee: Return any in-stock item within 30 days in original, unopened packaging for a full refund (excluding shipping and fees).
- 12-Month Warranty: Covers defects in materials or workmanship; excludes misuse, normal wear, or unauthorized modifications.
- Worldwide Shipping: We ship via USPS, UPS, FedEx, and DHL. Delivery times vary by country and may be subject to customs or import fees.
- Support & Contact: Technical and warranty assistance is available anytime. Contact us here: Contact.
- Purchase Guidance: Check product specifications and compatibility carefully before ordering to ensure proper application.
Tech & Buying Guide
Redundant Automation Systems: Ensuring Continuous Uptime in Critical Control Infrastructure
System reliability directly determines operational profitability across high stakes process industries. Modern industrial automation platforms must eliminate single points of failure to prevent catastrophic shutdowns. Deploying fault tolerant architecture safeguards complex facilities against unexpected hardware glitches, network disruptions, and maintenance outages.
Understanding Types of Noise in Electronic Circuits and Control Systems
Signal integrity directly determines measurement accuracy and loop stability across industrial automation environments. Electronic noise introduces unwanted stochastic interference into analog loops, sensor feedback lines, and digital fieldbus networks. Understanding how intrinsic electronic noise and external electromagnetic interference manifest allows control engineers to optimize signal conditioning and shield sensitive instrumentation effectively.
Why 24V DC Power Supplies Standardize Modern Industrial Automation
Industrial control cabinets worldwide rely on 24V DC as the universal power standard for field instrumentation, sensors, and controllers. Walk into any manufacturing plant, and you will find PLCs, human-machine interfaces (HMIs), and smart actuators running on extra-low voltage DC. Standardizing on 24V DC enhances operational safety, lowers cabinet footprint, and maintains steady control performance across factory networks.