Product Details
Configured for direct physical user interface repairs on industrial HMI panels, the ABB 3BSE069270R1 3BSE069270R2 (PP871 Touch Screen Component) provides direct physical/electrical execution for digitizing operator touch inputs.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | PP871 Touch Screen Assembly |
| Part Numbers | 3BSE069270R1 / 3BSE069270R2 |
| Brand | ABB |
| Origin | Sweden / Germany |
| Weight | 0.350 kg (Standard structural weight) |
| Dimensions | Sized precisely for standard PP871 Panel 800 hardware housings |
| Operating Temp | -10 to +60 deg C (Industrial-grade operating profile) |
| Power Consumption | Sourced directly from internal HMI processor board matrix |
| Component Type | Resistive touch screen matrix with matching protective film overlay |
| Connection Interface | Multi-pin flexible printed circuit (FPC) ribbon cable |
| Surface Hardness | Minimum 3H rating against scratching |
| Chemical Resistance | Industrial solvents, alcohol, and grease resistant |
Profinet / EtherNet/IP Deterministic Networks and I/O Density Scaling
The touch screen assembly translates mechanical pressure applied to the interface surface into coordinates processed by the local Panel 800 CPU. This digitized tracking loop coordinates with integrated automation profiles without reducing backplane bus communication velocity or generating packet delay across connected Profinet / EtherNet/IP deterministic networks. The matrix configuration supports seamless coordination with expanded I/O density scaling displays, keeping screen registry inputs sharp and stable during concurrent firmware flash compatibility upgrades on the master HMI console.
Frequently Asked Questions
Q: How do the 3BSE069270R1 and 3BSE069270R2 variants differ regarding technical compatibility?
A: Both part numbers represent functionally interchangeable repair configurations for the base PP871 HMI. The revision suffixes relate to specific manufacturing lots and minor ribbon cable routing updates, but they share identical structural dimensions and sensor layouts.
Q: Is special calibration required after mounting the replacement touch panel and overlay?
A: Yes. Once the hardware ribbon layer is connected and the unit is mounted within the housing frame, a standard touch alignment matrix routing must be executed from the HMI bios or configuration environment to sync physical coordinate points with the active display matrix.
Field Installation Guidelines
- Surface Decontamination: Thoroughly clean the underlying LCD panel matrix using an industrial lint-free electronics wipe before positioning the new touch element to prevent trapping airborne dust particles.
- Ribbon Alignment: Secure the flexible printed circuit (FPC) ribbon cable into the ZIF connector slot on the internal PCB logic board. Verify that the tracking pins lock symmetrically into position to avoid signal drops.
- Overlay Application: Apply the protective film overlay across the exterior front bezel frame. Use continuous surface pressure from the center outward to ensure complete adhesion and eliminate air pockets.
Additional Information
- 100% Genuine Parts: All products are original and authentic, ensuring reliable industrial performance.
- 30-Day Refund Guarantee: Return any in-stock item within 30 days in original, unopened packaging for a full refund (excluding shipping and fees).
- 12-Month Warranty: Covers defects in materials or workmanship; excludes misuse, normal wear, or unauthorized modifications.
- Worldwide Shipping: We ship via USPS, UPS, FedEx, and DHL. Delivery times vary by country and may be subject to customs or import fees.
- Support & Contact: Technical and warranty assistance is available anytime. Contact us here: Contact.
- Purchase Guidance: Check product specifications and compatibility carefully before ordering to ensure proper application.
Tech & Buying Guide
Transforming Shop Floor Data into Actionable Insights: A Deep Dive into MES
Manufacturing Execution Systems serve as the digital backbone of modern factory floors. Positioned at Level 3 of the ISA-95 automation pyramid, MES links enterprise resource planning with real-time shop floor control systems. Today, industrial operators rely on MES software to bridge operational strategy with physical production execution.
Managed Switch vs. Unmanaged Switch: Industrial Ethernet Architecture
Hot Standby vs. Cold Standby Redundancy in Industrial Automation
System availability determines process safety and productivity in industrial automation. Control engineers deploy redundancy to eliminate single points of failure. This technical guide evaluates Hot Standby vs. Cold Standby architectures, comparing failover speeds, memory sync, cost trade-offs, and field selection criteria.