Product Details
Configured for primary AC/DC-to-DC power conversion in Honeywell Safety Manager platforms, the Honeywell FS-PSU-240516 (FS-PSU-2405 Power Supply Unit) provides direct physical/electrical execution. It converts wide-range line voltage inputs into a regulated 24 VDC bus output rated for up to 16 A load current.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | FS-PSU-240516 |
| Brand | Honeywell |
| Origin | USA |
| Weight | 0.85 kg |
| Dimensions | 21.1 cm x 3.52 cm x 17.6 cm |
| Operating Temp | -20 to +70 deg C |
| Power Consumption | Self-dissipation based on >96% power conversion efficiency |
| Input Voltage Range | 85-265 VAC / 100-370 VDC |
| Output Voltage | 24 VDC |
| Output Current | 16 A |
| Ingress Protection | IP20 |
| Storage Temperature | -40 to +85 deg C |
| Relative Humidity | 10 to 95%, non-condensing |
Process Control & DCS Power Architecture Characteristics
The FS-PSU-240516 module incorporates galvanically isolated power conversion topology to shield system backplane electronics from field line transients. Maintaining greater than 96% energy conversion efficiency, the unit minimizes cabinet heat dissipation during high-density I/O switching operations. Onboard filtering circuits suppress conductive high-frequency noise, preventing voltage ripple propagation into sensitive 4-20 mA HART loop protocol instruments and field termination assemblies.
Frequently Asked Questions
Q: How does the FS-PSU-240516 handle input supply transients across wide operating ranges?
A: The internal switching network automatically regulates 24 VDC output stability without physical jumper configuration across all input ranges between 85-265 VAC and 100-370 VDC.
Q: Is hot-swapping permitted when replacing an FS-PSU-240516 unit in a parallel redundant rack configuration?
A: Live replacement is supported provided the parallel module carries the active 16 A load, ensuring system power continuity without interrupting downstream logic solver operation.
Field Installation Guidelines
- Orientation and Thermal Clearance: Mount the power supply vertically to facilitate natural thermal convection. Maintain a minimum vertical clearance of 50 mm above and below the housing.
- Terminal Wiring: Crimp all input AC/DC and output 24 VDC leads with insulated ferrules before securing them into terminal blocks to ensure low-resistance contacts.
- Earthing Requirements: Bond the protective earth (PE) terminal directly to the central cabinet grounding bus bar using a short, low-impedance copper strap.
- Load Segregation: Route 24 VDC secondary output cables in separate wiring troughs from high-voltage AC input lines to prevent electromagnetic coupling.
Additional Information
- 100% Genuine Parts: All products are original and authentic, ensuring reliable industrial performance.
- 30-Day Refund Guarantee: Return any in-stock item within 30 days in original, unopened packaging for a full refund (excluding shipping and fees).
- 12-Month Warranty: Covers defects in materials or workmanship; excludes misuse, normal wear, or unauthorized modifications.
- Worldwide Shipping: We ship via USPS, UPS, FedEx, and DHL. Delivery times vary by country and may be subject to customs or import fees.
- Support & Contact: Technical and warranty assistance is available anytime. Contact us here: Contact.
- Purchase Guidance: Check product specifications and compatibility carefully before ordering to ensure proper application.
Tech & Buying Guide
Master Acceptance Testing: Understanding FAT and SAT in Industrial Control Systems
Factory Acceptance Testing (FAT) and Site Acceptance Testing (SAT) serve as critical quality assurance gateways in complex industrial control systems. Both procedures verify that programmable logic controllers (PLCs), distributed control systems (DCS), and associated field devices meet strict functional specifications. However, executing these tests effectively requires clear delineation between off-site staging and final field commissioning.
Industrial Networking Essentials: Demystifying Hubs, Switches, and Routers in Control Systems
Industrial automation relies heavily on robust networking infrastructure to connect programmable logic controllers (PLCs), distributed control systems (DCS), and human-machine interfaces (HMIs). Modern factory automation environments generate vast amounts of real-time operational data across deterministic networks. Understanding the structural differences between hubs, switches, and routers ensures optimal traffic segmentation, minimizes latency, and maintains high network availability.
Safety Relays in Industrial Automation: Fundamentals, Design Standards, and Fail-Safe Architecture
Safety relays form the bedrock of functional safety in modern factory automation, preventing catastrophic equipment failure and protecting plant personnel. While standard electromechanical relays handle basic load switching, they lack the redundant diagnostics required for high-risk industrial environments. Modern industrial automation platforms—including programmable logic controllers (PLCs) and distributed control systems (DCS)—rely on specialized safety relays to monitor field devices and isolate hazards instantly.