Product Details
Configured for single-ended voltage or current signal processing in GE VersaMax control networks, the GE IC200ALG260C (IC200ALG260 Analog Input Module) provides direct physical/electrical execution.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | IC200ALG260C |
| Brand | GE (GE Fanuc) |
| Origin | USA |
| Operating Temp | 0 to +60 deg C |
| Power Consumption | Backplane current: 125 mA at 5 VDC |
| Input Channels | 8 single-ended channels |
| Input Signal Types | Voltage or current (unipolar or bipolar) |
| Resolution | 12 bits |
| Response Time | 5.0 ms (Filter response: 5 ms) |
| Update Rate | 0.4 ms |
| Status LED Indicators | OK, INT PWR |
Backplane Bus Communication Velocity & I/O Density Scaling
The IC200ALG260C communicates directly across the VersaMax carrier backplane bus, drawing 125 mA at 5 VDC while maintaining high backplane bus communication velocity. The module executes analog-to-digital conversions across 8 single-ended input channels at a scan update rate of 0.4 ms, supporting dynamic field device telemetry routing to the main CPU solver.
Full compatibility with Profinet / EtherNet/IP deterministic networks via network interface units enables predictable multi-node I/O density scaling. Integrated flash memory maintains firmware flash compatibility to eliminate data conversion skew and enforce precise channel failure diagnostic reporting (Hold Last State or Default Value).
Frequently Asked Questions
Q: What power draw does the IC200ALG260C module place on the VersaMax backplane 5 VDC bus?
A: The module draws 125 mA at 5 VDC from the backplane logic supply during normal 8-channel acquisition.
Q: Can the IC200ALG260C be inserted or removed under power (hot-swapped)?
A: Hot-swapping is permitted only when using an active VersaMax backplane carrier designed for hot insertion; otherwise, baseboard power must be isolated prior to removal.
Q: How does the module handle signal faults or internal power failures?
A: Diagnostics detect loss of internal power, allowing the module to execute a user-configured fault response: either holding the last valid value or defaulting to a predefined state.
Field Installation Guidelines
- Power Isolation: Turn off the external 24 VDC loop power supply and backplane rack power prior to mounting or dismounting the module from its carrier.
- Electrostatic Protection: Wear a grounded ESD wrist strap connected to the enclosure metal frame when handling the card or setting dip switches.
- Carrier Alignment: Align the module keying mechanisms with the VersaMax I/O carrier slot and press firmly until the locking latch engages fully.
- Shield Termination: Connect twisted-pair analog signal cable shields to the dedicated carrier ground terminals to minimize noise coupling on 4-20 mA or voltage loops.
- Field Wiring Clearance: Maintain a minimum 50 mm physical separation between low-level analog input wiring and high-voltage AC power lines within the cabinet raceways.
Additional Information
- 100% Genuine Parts: All products are original and authentic, ensuring reliable industrial performance.
- 30-Day Refund Guarantee: Return any in-stock item within 30 days in original, unopened packaging for a full refund (excluding shipping and fees).
- 12-Month Warranty: Covers defects in materials or workmanship; excludes misuse, normal wear, or unauthorized modifications.
- Worldwide Shipping: We ship via USPS, UPS, FedEx, and DHL. Delivery times vary by country and may be subject to customs or import fees.
- Support & Contact: Technical and warranty assistance is available anytime. Contact us here: Contact.
- Purchase Guidance: Check product specifications and compatibility carefully before ordering to ensure proper application.
Tech & Buying Guide
Demystifying the 5 Levels of Industrial Automation Architecture
Modern manufacturing relies on structured communication hierarchy to bridge physical shop-floor hardware with enterprise management software. This framework, commonly known as the Automation Pyramid, establishes how data flows between field devices, logic controllers, and corporate IT networks. Understanding these five distinct levels helps engineers and plant managers optimize system operations, reduce downtime, and implement seamless factory automation solutions.
Transforming Shop Floor Data into Actionable Insights: A Deep Dive into MES
Manufacturing Execution Systems serve as the digital backbone of modern factory floors. Positioned at Level 3 of the ISA-95 automation pyramid, MES links enterprise resource planning with real-time shop floor control systems. Today, industrial operators rely on MES software to bridge operational strategy with physical production execution.
