Product Details
Configured for power line monitoring and fault isolation in Mark V Speedtronic systems, the GE DS200LPPAG1AAA (DS200LPPA Line Protection Panel Board) provides direct physical execution of overcurrent and surge protection sequences.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | DS200LPPAG1AAA |
| Brand | General Electric |
| Origin | USA |
| Dimensions | 33.0 cm x 17.8 cm |
| Operating Temp | 40 deg C to 85 deg C |
| Power Consumption | 28 V DC (Supply voltage) |
| Core Performance | 12 input channels, 125 V DC outputs, 230-600 VAC input range |
Industrial Control & Firmware Compatibility
The DS200LPPAG1AAA utilizes surface mount technology to manage 12 discrete input channels and provide 125 V DC output signals for fault state reporting. The module maintains system integrity by integrating overcurrent, short-circuit, and ground fault detection. Backplane bus communication velocity is standardized for the Mark V architecture, allowing the board to interface with the turbine control processor for status reporting. I/O density scaling is fixed by the 12-channel input configuration, necessitating precise mapping to external protective devices. Firmware flash compatibility is not supported; all protection logic, including thermal-magnetic and electronic circuit tripping, is implemented via hard-wired discrete components and active surge protection circuitry to ensure deterministic fault isolation without reliance on software-based execution.
Frequently Asked Questions
Q: Does this board support software-based firmware updates?
A: No. The DS200LPPAG1AAA is a hardware-based protection module. Logic for circuit interruption, surge diversion, and ground fault detection is implemented through physical circuit design and does not support firmware flash procedures.
Q: Can the input voltage range be modified for lower supply systems?
A: No. The board is specified for 230 to 600 VAC inputs. Operating outside of this range will compromise the surge protection device (SPD) thresholds and may result in permanent damage to the board's surface-mount components.
Field Installation Guidelines
- Chassis Mounting: Secure the board to the cabinet using the specified chassis mounting points. Ensure the mounting surface is conductive and grounded to the cabinet frame to maintain the integrity of the ground fault detection reference.
- Wiring Standards: Utilize shielded cables for all input channel connections to minimize noise induction. Ensure that the 230-600 VAC inputs are routed through appropriately rated conduit and isolated from low-voltage signal lines.
- Thermal Environment: The module is rated for operation up to 85 deg C. Ensure that the enclosure ventilation system is active and that no heat-generating components are positioned directly adjacent to the board to prevent thermal degradation of the surge protection elements.
- Periodic Inspection: Inspect the board for signs of component overheating or discoloration of the surface-mount resistors. Ensure that the ground fault protection relay interface is tested periodically to verify responsiveness to leakage current scenarios.
Additional Information
- 100% Genuine Parts: All products are original and authentic, ensuring reliable industrial performance.
- 30-Day Refund Guarantee: Return any in-stock item within 30 days in original, unopened packaging for a full refund (excluding shipping and fees).
- 12-Month Warranty: Covers defects in materials or workmanship; excludes misuse, normal wear, or unauthorized modifications.
- Worldwide Shipping: We ship via USPS, UPS, FedEx, and DHL. Delivery times vary by country and may be subject to customs or import fees.
- Support & Contact: Technical and warranty assistance is available anytime. Contact us here: Contact.
- Purchase Guidance: Check product specifications and compatibility carefully before ordering to ensure proper application.
Tech & Buying Guide
Executing a PLC System Site Acceptance Test (SAT): The Definitive Engineering Guide
The transition of a Programmable Logic Controller (PLC) cabinet from a controlled factory floor to a volatile plant environment represents a critical milestone in factory automation. While a Factory Acceptance Test (FAT) validates standalone hardware compliance under ideal conditions, it cannot replicate real-world process dynamics. Therefore, deploying an industrial automation system requires a rigorous Site Acceptance Test (SAT) to verify total loop integrity, field wiring wiring metrics, and process control parameters before final customer handover.
Advanced Integration: Master Protocol for VFD Commissioning and Testing
Deploying variable frequency drives (VFDs) requires precise execution during the initial commissioning phase. Junior automation engineers often find the first power-up sequence intimidating. However, following a rigorous engineering framework ensures equipment safety and system reliability. Proper startup procedures protect both the drive electronics and the connected motor.
Optimizing Factory Automation: The Definitive Guide to VFD Preventive Maintenance
Variable Frequency Drives (VFDs) serve as critical assets in modern industrial automation. These power electronic devices regulate electric motors by adjusting the supplied frequency and voltage. Consequently, industries utilize VFDs to reduce energy consumption and optimize process control. Major manufacturers like Siemens, ABB, and Yaskawa design highly efficient drives. However, sustained efficiency requires a rigorous preventive maintenance program.