Product Details
Configured for seismic vibration acquisition in rotating machinery, the Emerson EPRO PR9268/301-100 (PR9268/301-100) Electrodynamic Velocity Sensor provides direct electrical execution of velocity-based vibration monitoring.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | PR9268/301-100 |
| Brand | Emerson EPRO |
| Operating Temp | -40 deg C to +125 deg C |
| Power Consumption | Passive (no external power) |
| Sensitivity | 28.5 mV/mm/s |
| Frequency Range | 4 to 1000 Hz |
| Measurement Range | +/- 1.5 mm |
Mechanical Monitoring and TSI Characteristics
The PR9268/301-100 operates on an electrodynamic principle, where an internal mass-spring system converts seismic mechanical motion into a proportional voltage output. Accurate rotor dynamics analysis requires the sensor to be mounted within its calibrated orientation—specifically, horizontal with a tolerance of +/- 10 deg for this variant. Operators must verify proper cabling to the monitoring system, as high-frequency coil induction is susceptible to electromagnetic interference. To maintain signal integrity, ensure the sensor body is mechanically coupled to the machine casing to minimize high-frequency attenuation, and perform periodic impedance checks to confirm the coil circuit continuity remains within specified limits.
Frequently Asked Questions
Q: Does the sensor require an external power supply to function?
A: No. The PR9268/301-100 is a passive electrodynamic device that generates its own output signal based on seismic movement. It does not require supply voltage, but must be connected to a compatible signal conditioner with the correct input impedance.
Q: What is the significance of the natural frequency rating?
A: The natural frequency of 4.5 Hz +/- 0.75 Hz defines the lower limit of the sensor's linear measurement range. Operation below this natural frequency will result in phase shift and non-linear amplitude response, making it unsuitable for low-frequency structural vibration analysis.
Field Installation Guidelines
- Secure the sensor to a flat, machined surface on the bearing housing or casing using a heavy-duty mounting stud to ensure rigid high-frequency transmission.
- Verify the mounting orientation is horizontal; exceeding the +/- 10 deg tolerance will introduce gravitational bias to the internal spring, altering the natural frequency and damping characteristics.
- Terminate signal leads at the signal conditioner input using shielded twisted-pair cabling; connect the shield to a common instrument ground to minimize 50/60 Hz line noise.
- Confirm the cable length does not introduce excessive capacitive loading, which can attenuate the high-frequency response (up to 1000 Hz).
- Conduct a physical tap test during commissioning to verify a positive output signal, confirming polarity and circuit integrity before the machinery is brought to full operating speed.
Additional Information
- 100% Genuine Parts: All products are original and authentic, ensuring reliable industrial performance.
- 30-Day Refund Guarantee: Return any in-stock item within 30 days in original, unopened packaging for a full refund (excluding shipping and fees).
- 12-Month Warranty: Covers defects in materials or workmanship; excludes misuse, normal wear, or unauthorized modifications.
- Worldwide Shipping: We ship via USPS, UPS, FedEx, and DHL. Delivery times vary by country and may be subject to customs or import fees.
- Support & Contact: Technical and warranty assistance is available anytime. Contact us here: Contact.
- Purchase Guidance: Check product specifications and compatibility carefully before ordering to ensure proper application.
Tech & Buying Guide
Optimizing Tank Level Control Using Proportional Algorithms in PLC Systems
Industrial automation engineers frequently encounter liquid level regulation challenges across diverse process plants. Traditional ON-OFF control mechanisms often disrupt system stability due to abrupt actuator switching. Therefore, upgrading to closed-loop architectures like proportional control yields smoother responses. In a typical PLC environment, such as Siemens TIA Portal, engineers utilize closed-loop feedback to minimize process errors without requiring full PID complexity.
Understanding Why Your PLC Enters Stop Mode: Causes and Troubleshooting
In industrial automation, programmable logic controllers (PLCs) serve as the core intelligence of modern factory automation and distributed control systems (DCS). Understanding how a PLC transitions between modes is vital for maintenance engineers. Typically, a PLC operates across four primary modes: Run, Stop, Start-Up, and Hold. When power is applied, the system immediately boots into Stop mode before initiating the Start-Up sequence. If the controller encounters a critical error during execution, it automatically reverts to Stop mode to prevent equipment damage. Therefore, monitoring these state transitions helps technicians maintain high system availability.
Comprehensive Guide to Servo Motor Drive Control Techniques in Industrial Automation
Precision motion control systems drive high-throughput manufacturing across modern industrial automation environments. Unlike standard induction motors running on basic variable frequency drives, servo motor systems deliver sub-millimeter positioning accuracy and fast dynamic response.