Product Details
The Honeywell 2MLL-CH2A, also cataloged as the 2MLL-CH2A Serial Communication Interface Modules, operates as a dedicated hardware component for serial data protocol handling within Master-K platform PLC networks. It establishes dual asynchronous channels to route field device data via RS-232C and RS-422/485 serial interfaces directly into the central processor memory map.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | 2MLL-CH2A |
| Brand | Honeywell |
| Origin | Industrial Standard Assembly |
| Weight | 119 g |
| Dimensions | Standard Rack Slot Width |
| Operating Temp | 0 to 55 deg C |
| Power Consumption | 310 mA (Backplane 5 VDC) |
| Physical Interface | 1 Channel RS-232C, 1 Channel RS-422/485 |
| Transmission Speed | 300 to 115200 bps |
| Transmission Distance | RS-232C: 15 m; RS-422/485: 500 m max |
| Supported Protocols | Modbus RTU/ASCII Slave, P2P Master, User-Defined |
4-20 mA HART Loop Protocol & DCS Integration
While operating primarily as an asynchronous serial processor, the module enables protocol mapping interfaces that interact with field instrument networks. Integrated channel-to-channel isolation safeguards backplane communications from electrical noise, common-mode ground potential shifts, and transient surges originating on external RS-422/485 multidrop lines. This isolation barrier prevents loop corruption and maintains signal processing integrity across long line distances when transmitting digitized process values from legacy 4-20 mA transmitters or serial gateway bridges.
Frequently Asked Questions
Q: What is the backplane current draw for the 2MLL-CH2A module during active transmission?
A: The module draws a continuous current of 310 mA from the internal 5 VDC backplane bus power supply. Ensure the base rack power supply unit has sufficient overhead capacity prior to adding channels.
Q: How are network parameters and protocol selections assigned to the dual serial ports?
A: Parameter assignments including baud rate (300 to 115200 bps), data bits (7 or 8), parity, and protocol modes (Modbus RTU/ASCII or P2P) are configured via the SoftMaster-NM programming environment and flashing memory down to the module interface.
Q: What topology configuration options exist for the RS-422/485 channel?
A: The RS-422/485 port supports 1:1, 1:N, and N:M multi-drop networking configurations with station numbers assigned from 0 to 31, servicing up to 32 network nodes across a maximum distance of 500 m.
Field Installation Guidelines
- Power down the PLC rack chassis completely before inserting or removing the module from the backplane slot.
- Verify that shield wires for RS-422/485 serial cables are grounded at a single point to prevent ground loops from introducing serial framing errors.
- Keep RS-232C cable runs within the 15 m physical length limit to avoid signal attenuation and parity faults at higher baud rates.
- Ensure terminating resistors (typically 120 ohm) are enabled or connected across the physical end-nodes of the RS-485 differential bus line.
Additional Information
- 100% Genuine Parts: All products are original and authentic, ensuring reliable industrial performance.
- 30-Day Refund Guarantee: Return any in-stock item within 30 days in original, unopened packaging for a full refund (excluding shipping and fees).
- 12-Month Warranty: Covers defects in materials or workmanship; excludes misuse, normal wear, or unauthorized modifications.
- Worldwide Shipping: We ship via USPS, UPS, FedEx, and DHL. Delivery times vary by country and may be subject to customs or import fees.
- Support & Contact: Technical and warranty assistance is available anytime. Contact us here: Contact.
- Purchase Guidance: Check product specifications and compatibility carefully before ordering to ensure proper application.
Tech & Buying Guide
FAT vs SAT in Industrial Control Systems: Key Differences and Execution Guide
Industrial control system deployment relies on strict verification protocols to guarantee operational safety, system stability, and regulatory compliance. Commissioning complex Programmable Logic Controller (PLC) racks, Distributed Control Systems (DCS), and Safety Instrumented Systems (SIS) requires two critical milestones: the Factory Acceptance Test (FAT) and the Site Acceptance Test (SAT). Both procedures validate that system automation meets design specifications, but they occur at different stages of project execution and target distinct operational risks.
Hub vs Switch vs Router in Industrial Automation Architecture
Modern factory automation relies on reliable industrial networking infrastructure to exchange real-time field data across operational technology systems. Engineers often encounter networking hardware like hubs, switches, and routers when integrating Programmable Logic Controllers, Distributed Control Systems, and SCADA monitoring nodes. Although these devices share physical ports, they operate at different layers of the Open Systems Interconnection reference model and deliver distinct traffic management capabilities.
Marshalling Cabinet Preventive Maintenance: Essential Healthiness Checks for PLC, DCS, and ESD Systems
Marshalling cabinets serve as the vital interface between field instrumentation and control room electronics in modern process facilities. Regular preventive maintenance of these cabinets ensures signal integrity across programmable logic controllers (PLCs), distributed control systems (DCS), and emergency shutdown (ESD) networks. System technicians must execute structured inspection protocols to mitigate environmental risks, identify loose wiring, and maintain continuous operational readiness.