Product Details
The Yokogawa VM1*S, also cataloged as the VM1 Multipoint Analog I/O Card, operates as a dedicated hardware component for simultaneous analog signal acquisition and generation within CENTUM VP and CENTUM CS 3000 platforms.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | VM1*S |
| Brand | Yokogawa |
| Origin | Japan |
| Module Type | Multipoint Analog I/O Card |
| Input Channels | 8 Analog Inputs (4-20 mA DC) |
| Output Channels | 8 Analog Outputs (4-20 mA DC) |
| Weight | 0.4 kg |
| Dimensions | Standard Rack Slot Module Form Factor |
| Operating Temp | 0 to 50 deg C |
| Power Consumption | Max. 3.5 W |
Channel Isolation & Loop Protocol Infrastructure
The VM1*S card integrates galvanically isolated analog signal paths across its 16 total channels to isolate internal system buses from field side transients. This channel isolation structure prevents ground loops across the 8 analog input and 8 analog output loops, preserving signal linearity for attached 4-20 mA HART loop protocol field devices. High-density input and output conversion stages maintain analog accuracy across parallel loop runs without crosstalk interference.
Frequently Asked Questions
Q: How does the VM1*S manage system backplane power distribution across its input and output channels?
A: The card draws a maximum of 3.5 W directly from the rack backplane power supply, distributing internal regulated DC rails across both the 8 input conversion circuits and 8 output driver stages.
Q: Can the VM1*S card be hot-swapped during active controller rack operation?
A: Module removal or replacement during active operation depends on system redundancy settings; online replacement requires following controller slot deactivation procedures to prevent loop interruption or backplane bus faulting.
Field Installation Guidelines
Insert the VM1*S card vertically into the assigned CENTUM VP or CS 3000 node slot, sliding the module along the chassis card guides until the backplane multi-pin connector is fully seated. Fasten the front panel retention screws to secure physical mounting and establish low-impedance frame ground continuity. Route all 4-20 mA input and output cabling through shielded twisted pairs, connecting cable shields to a dedicated cabinet earth bar to prevent external noise coupling.
Additional Information
- 100% Genuine Parts: All products are original and authentic, ensuring reliable industrial performance.
- 30-Day Refund Guarantee: Return any in-stock item within 30 days in original, unopened packaging for a full refund (excluding shipping and fees).
- 12-Month Warranty: Covers defects in materials or workmanship; excludes misuse, normal wear, or unauthorized modifications.
- Worldwide Shipping: We ship via USPS, UPS, FedEx, and DHL. Delivery times vary by country and may be subject to customs or import fees.
- Support & Contact: Technical and warranty assistance is available anytime. Contact us here: Contact.
- Purchase Guidance: Check product specifications and compatibility carefully before ordering to ensure proper application.
Tech & Buying Guide
Batch vs Continuous Processing in Industrial Automation: Architectural Strategies for Control Engineers
Selecting the proper control architecture remains a pivotal decision when designing industrial automation systems. Automation engineers must evaluate whether a batch or continuous process model best fits their production requirements. This fundamental choice influences PLC and DCS programming, hardware redundancy, sensor selection, and overall factory automation layouts.
Demystifying Signal Isolators: Operating Principles, Architectural Types, and Industrial Applications
Industrial automation systems rely on pristine analog signal transmission across complex control loops. Instrument technicians and system integrators frequently deploy signal isolators to maintain signal integrity between field sensors and control platforms. Eliminating electrical noise, ground loops, and high-voltage transients protects delicate PLC, DCS, and SCADA input channels from permanent damage.
Demystifying Industrial Control Systems: Comparing PLC, DCS, RTU, SCADA, and PAC
Modern factory automation relies on distinct control architectures to manage complex process environments efficiently. Control engineers often evaluate PLC, DCS, RTU, SCADA, and PAC platforms when designing industrial infrastructure. Understanding the functional boundaries of each technology ensures optimal system performance, high availability, and long-term cost efficiency.