Product Details
Configured for TCP/IP-based communication in Honeywell TPS/LCN operator and controller stations, the Honeywell 51402614-100 (51402614-100 Ethernet Board Module) provides direct physical/electrical execution.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | 51402614-100 |
| Brand | Honeywell |
| Origin | USA |
| Weight | Approx. 0.2 kg |
| Dimensions | 120 mm x 80 mm x 30 mm |
| Operating Temp | 0 to 60 deg C |
| Power Consumption | 5 VDC +/- 5% (Max 3 W) |
| Module Type | Ethernet Board Module |
| Communication Protocols | TCP/IP, ARP |
| Data Rate | Up to 10 Mbps |
| System Compatibility | Honeywell TPS/LCN operator and controller stations |
| Installation | Board-level installation within station hardware |
Channel Isolation & Network Protocol Execution
Designed for real-time process control data routing, the module executes deterministic Ethernet frame transfers across station backplane architectures. Integrated channel-to-channel isolation safeguards sensitive internal logic circuitry from transient voltage spikes and differential ground potential offsets. The onboard physical layer interface manages ARP packet verification and TCP/IP stack execution, maintaining continuous connection integrity between operator stations and low-level process controllers without imposing CPU processing overhead on the host node.
Frequently Asked Questions
Q: What input supply voltage does the 51402614-100 board require from the host backplane?
A: The board operates on a regulated 5 VDC +/- 5% power rail, consuming a maximum power load of 3 W during active network data transmission.
Q: Which network communication protocols are implemented on this hardware module?
A: The module directly supports TCP/IP and ARP protocols over Ethernet interfaces operating at data rates up to 10 Mbps.
Q: How is physical frame grounding established during board installation?
A: Grounding is established via the board mounting chassis points and frame retention screws, which bond the ground plane directly to the host enclosure chassis upon installation.
Field Installation Guidelines
- Disconnect all electrical power sources from the target Honeywell TPS/LCN station chassis before accessing internal slots.
- Wear a grounded wrist strap attached to frame ground to prevent electrostatic discharge damage to board components.
- Align the 51402614-100 circuit board edges with the card guide rails inside the designated station slot.
- Press the module smoothly into place until the multi-pin edge connectors seat completely into the host backplane.
- Tighten all mechanical mounting screws to ensure proper electrical contact for frame grounding and mechanical stability.
- Verify external coaxial or twisted-pair network cable connections before re-energizing the station power supply.
Additional Information
- 100% Genuine Parts: All products are original and authentic, ensuring reliable industrial performance.
- 30-Day Refund Guarantee: Return any in-stock item within 30 days in original, unopened packaging for a full refund (excluding shipping and fees).
- 12-Month Warranty: Covers defects in materials or workmanship; excludes misuse, normal wear, or unauthorized modifications.
- Worldwide Shipping: We ship via USPS, UPS, FedEx, and DHL. Delivery times vary by country and may be subject to customs or import fees.
- Support & Contact: Technical and warranty assistance is available anytime. Contact us here: Contact.
- Purchase Guidance: Check product specifications and compatibility carefully before ordering to ensure proper application.
Tech & Buying Guide
Optimizing Tank Level Control Using Proportional Algorithms in PLC Systems
Industrial automation engineers frequently encounter liquid level regulation challenges across diverse process plants. Traditional ON-OFF control mechanisms often disrupt system stability due to abrupt actuator switching. Therefore, upgrading to closed-loop architectures like proportional control yields smoother responses. In a typical PLC environment, such as Siemens TIA Portal, engineers utilize closed-loop feedback to minimize process errors without requiring full PID complexity.
Understanding Why Your PLC Enters Stop Mode: Causes and Troubleshooting
In industrial automation, programmable logic controllers (PLCs) serve as the core intelligence of modern factory automation and distributed control systems (DCS). Understanding how a PLC transitions between modes is vital for maintenance engineers. Typically, a PLC operates across four primary modes: Run, Stop, Start-Up, and Hold. When power is applied, the system immediately boots into Stop mode before initiating the Start-Up sequence. If the controller encounters a critical error during execution, it automatically reverts to Stop mode to prevent equipment damage. Therefore, monitoring these state transitions helps technicians maintain high system availability.
Comprehensive Guide to Servo Motor Drive Control Techniques in Industrial Automation
Precision motion control systems drive high-throughput manufacturing across modern industrial automation environments. Unlike standard induction motors running on basic variable frequency drives, servo motor systems deliver sub-millimeter positioning accuracy and fast dynamic response.