Product Details
Configured for optical flame sensor signal analysis and flame detection logic execution in DCS and PLC architectures, the ABB FAU800 (FAU800 Flame Analysis Module) provides direct physical/electrical execution. The module evaluates dynamic flame signals across two independent channels, interfacing directly with ABB flame rods, 4-20 mA sensors, or 0-5 V input signals to control dedicated fault relays within predefined 0.1 to 2.5 second response windows.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | FAU800 |
| Brand | ABB |
| Operating Temp | -40 deg C to +70 deg C |
| Power Consumption | 6 W typical |
| Power Supply | 24 VDC (21.6 to 31.2 VDC range), Dual Redundant |
| Signal Input Channels | 2 Independent Channels (Flame rod, 4-20 mA, 0-5 V) |
| Output Relays | Configurable flame fault relay outputs |
| Communication Ports | 2 x PROFIBUS DP (9-pin D-Sub), 2 x Ethernet (RJ45) |
| Isolation Rating | 500 VAC channel-to-channel, 1500 VAC system-to-system |
| System Protocols | PROFIBUS DP-V1 (12 Mbps), Modbus RTU/TCP (100 Mbps) |
Backplane Bus Communication Velocity & I/O Density Scaling
The FAU800 module maintains backplane bus communication velocity and high-speed data throughput via dual PROFIBUS DP interfaces supporting up to 12 Mbps and dual Ethernet ports operating at 100 Mbps. Its twin-channel footprint optimizes cabinet I/O density scaling by consolidating flame sensor signal processing and safety relay output channels into a single chassis slot. Full firmware flash compatibility allows online parameter adjustments and continuous diagnostic status monitoring over Modbus TCP or PROFIBUS network topologies.
Frequently Asked Questions
Q: How is galvanic isolation structured across the FAU800 signal channels?
A: The module provides 500 VAC galvanic isolation between individual signal channels and 1500 VAC isolation between input channels and system logic circuits.
Q: What power redundancy configurations does the FAU800 support?
A: The FAU800 features dual redundant 24 VDC power input terminals, allowing connection to two independent power supplies across the 21.6 VDC to 31.2 VDC operating range.
Q: Can response timing for flame fault detection be configured on the module?
A: Yes. The trip response delay is configurable within a range of 0.1 to 2.5 seconds to match process safety requirement specifications.
Field Installation Guidelines
Follow these technical procedures during panel installation and field cabling:
- Chassis Mounting: Mount the FAU800 module vertically inside the enclosure rail frame, ensuring top and bottom ventilation paths remain unobstructed.
- Ground Bonding: Connect the module chassis ground terminal to the main panel protective earthing (PE) bus using a low-impedance copper strap to minimize high-frequency interference.
- Signal Wiring: Route flame rod, 4-20 mA, and 0-5 V sensor cables in individually shielded twisted pairs. Terminate cable shields at the dedicated chassis earth bar.
- Power & Communication Termination: Wire dual 24 VDC power lines to the redundant input terminals. Secure D-Sub 9 connectors for PROFIBUS or RJ45 Ethernet cables, ensuring retaining screws are locked.
Additional Information
- 100% Genuine Parts: All products are original and authentic, ensuring reliable industrial performance.
- 30-Day Refund Guarantee: Return any in-stock item within 30 days in original, unopened packaging for a full refund (excluding shipping and fees).
- 12-Month Warranty: Covers defects in materials or workmanship; excludes misuse, normal wear, or unauthorized modifications.
- Worldwide Shipping: We ship via USPS, UPS, FedEx, and DHL. Delivery times vary by country and may be subject to customs or import fees.
- Support & Contact: Technical and warranty assistance is available anytime. Contact us here: Contact.
- Purchase Guidance: Check product specifications and compatibility carefully before ordering to ensure proper application.
Tech & Buying Guide
Demystifying CPU Communication Ports in Siemens PLC Architectures
Industrial automation relies heavily on robust data exchange between devices. Without seamless connectivity, field instruments, network switches, human-machine interfaces, and programmable logic controllers cannot coordinate effectively. Therefore, understanding the various CPU communication ports available in Siemens hardware ensures efficient factory automation design and seamless system integration.
Mastering the Siemens PLC Scan Cycle: How the CPU Executes Automation Programs
Industrial automation relies heavily on programmable logic controllers (PLCs) to manage complex manufacturing processes. Many engineers dive straight into programming without mastering the underlying architecture. However, understanding how a PLC CPU executes a program ensures reliable system design. Therefore, mastering the scan cycle optimizes both performance and troubleshooting in modern control systems.
How to Connect to Siemens S7 PLCs: 5 Essential Communication Methods
Establishing a reliable hardware link between a programming terminal and a Siemens SIMATIC controller is essential for engineering workflows. Field engineers rely on distinct physical layers, ranging from legacy serial connections to high-speed Industrial Ethernet protocols. Modern factory automation environments prioritize fast data transfer and seamless driver integration. Selecting the correct connection method simplifies program downloads, online monitoring, and system troubleshooting in complex control systems.