Product Details
The ABB CI 773F 3BDH000395R0001, also cataloged as the CI 773F Communication Interface, operates as a dedicated hardware component for PROFIBUS DP Master protocol execution within Freelance DCS and AC 700F system architectures.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | CI 773F (3BDH000395R0001) |
| Brand | ABB |
| Origin | Germany |
| Weight | 0.096 kg |
| Dimensions | 28 mm x 75 mm x 135 mm |
| Operating Temp | -20 to +70 deg C |
| Power Consumption | 1.6 W (80 mA via CPU 24 VDC terminal) |
| Protocol Support | PROFIBUS DP Master |
| Transmission Rate | 9.6 kbit/s to 12 Mbit/s |
| Physical Interface | 9-pin D-Sub connector |
| Hot Swap Support | Supported |
| Ingress Protection | IP20 |
Deterministic Network Integration and I/O Density Scaling
The CI 773F module manages high-speed PROFIBUS DP Master field bus communications, interfacing directly with local backplane bus communication velocity frameworks to streamline data exchange across Profinet and EtherNet/IP deterministic networks. Optimized internal transceiver architecture permits maximum I/O density scaling across distributed remote nodes, while onboard flash memory maintains full firmware flash compatibility during online CPU parameter updates and bus cycle reconfigurations.
Frequently Asked Questions
Q: Can the CI 773F module be replaced while the system backplane remains powered?
A: Yes, the CI 773F supports hot-swap functionality, allowing removal and insertion on an energized local base unit without disturbing CPU backplane operations.
Q: How is primary operating power supplied to the CI 773F interface?
A: Operating power is drawn directly from the 24 VDC terminal of the host CPU module across the backplane, consuming a typical current of 80 mA.
Q: What physical connector standard is required for field bus wiring?
A: Field bus cabling connects through a standard 9-pin female D-Sub connector supporting RS485 differential signaling up to 12 Mbit/s.
Field Installation Guidelines
- Isolate or verify loop insulation on field bus cables prior to mating the 9-pin D-Sub connector to prevent transceiver damage.
- Secure the D-Sub connector retaining screws to ensure continuous ground shield continuity across the metal housing.
- Verify proper placement of PROFIBUS DP line termination resistors at both physical ends of the RS485 segment.
- Maintain a minimum clearance of 25 mm above and below the module enclosure to permit natural convective heat dissipation under high ambient load conditions.
Additional Information
- 100% Genuine Parts: All products are original and authentic, ensuring reliable industrial performance.
- 30-Day Refund Guarantee: Return any in-stock item within 30 days in original, unopened packaging for a full refund (excluding shipping and fees).
- 12-Month Warranty: Covers defects in materials or workmanship; excludes misuse, normal wear, or unauthorized modifications.
- Worldwide Shipping: We ship via USPS, UPS, FedEx, and DHL. Delivery times vary by country and may be subject to customs or import fees.
- Support & Contact: Technical and warranty assistance is available anytime. Contact us here: Contact.
- Purchase Guidance: Check product specifications and compatibility carefully before ordering to ensure proper application.
Tech & Buying Guide
Safety Relays in Industrial Automation: Fundamentals, Design Standards, and Fail-Safe Architecture
Safety relays form the bedrock of functional safety in modern factory automation, preventing catastrophic equipment failure and protecting plant personnel. While standard electromechanical relays handle basic load switching, they lack the redundant diagnostics required for high-risk industrial environments. Modern industrial automation platforms—including programmable logic controllers (PLCs) and distributed control systems (DCS)—rely on specialized safety relays to monitor field devices and isolate hazards instantly.
Voice-Activated Industrial Automation: Integrating Speech Control into PLC and DCS Architectures
Industrial automation integrates speech recognition, IIoT protocols, and NLP with PLCs and DCS to streamline operations. By leveraging advanced edge computing, engineers enable real-time, hands-free control—allowing personnel to manage smart factory processes safely away from hazardous equipment.
Modern Industrial Automation: Transforming Safety and Efficiency in Mining Operations
Industrial automation has evolved from a simple manufacturing tool into the operational backbone of high-risk sectors. Modern mining operations increasingly rely on advanced control systems, programmable logic controllers (PLCs), distributed control systems (DCS), and artificial intelligence to address deep-underground hazards. By replacing manual labor in high-risk zones, factory automation technologies protect personnel while significantly boosting operational throughput.