Product Details
The ABB DSBB 172A 57310256-EL, also cataloged as the DSBB 172A PBC Backplane I/O, operates as a dedicated hardware component for localized control logic execution within the ABB Advant Master Process Control System. This unit functions as a localized physical interface card, securing discrete signal paths and routing real-time input/output operational datasets directly to internal rack processing elements.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | DSBB 172A 57310256-EL |
| Brand | ABB |
| Origin | Sweden / Germany |
| Weight | 0.54 kg |
| Dimensions | Standard rack option-slot architecture baseline |
| Operating Temp | 0 to 60 deg C |
| Power Consumption | System backplane bus driven |
| Product Type | Digital I/O Cards |
| Old Product ID Replacement | 57310256-CM |
| New Product ID Replacement | 3BSE014017R1 |
| Regulatory Compliance | Exempted from RoHS directive 2011/65/EU scope (Article 2(4)) |
| WEEE Category | Product Not in WEEE Scope |
Profinet / EtherNet/IP Deterministic Networks and I/O Density Scaling
The internal physical circuit pathways of the ABB DSBB 172A 57310256-EL are optimized to comply with specific backplane bus communication velocity thresholds. When local processing nests are integrated into expanded Profinet or EtherNet/IP deterministic networks via master communication modules, the hardware tracks and distributes binary channel variables without introducing signal transmission delay. The design layout isolates internal signal lanes to tolerate aggressive I/O density scaling inside the enclosure, ensuring that high-frequency switching noise does not degrade adjacent bus segments or violate host controller firmware flash compatibility profiles.
Frequently Asked Questions
Q: Is this backplane I/O board rated for hot-swap operations while the Advant Master system rack is powered?
A: No. The DSBB 172A lacks isolated hot-swap circuitry. Removing or inserting this module while the backplane power distribution network is active can generate electrical transients across the terminal socket pins, risking permanent logic failure or immediate corruption of active controller parameters.
Q: What action must be implemented if replacing an older 57310256-CM module variant?
A: The DSBB 172A 57310256-EL serves as a direct functional replacement. Before placing the new hardware inline, perform a diagnostic system validation check to confirm that the existing controller firmware flash compatibility profile supports the board revision parameters.
Field Installation Guidelines
- ESD Handling Procedures: Field technicians must wear a properly adjusted, grounded electrostatic discharge (ESD) wrist strap before extracting the hardware assembly from its static-shielded packaging to avoid dielectric track failure.
- Mechanical Seating Sequence: Isolate the primary power supplies to the rack enclosure. Slide the card evenly along the chassis structural guide tracks to avoid pin deformation on the backplane connector. Tighten all front retention screws completely to secure structural ground continuity.
- Control Wire Separation: Route all external field lines connected to the I/O interface through separate low-voltage wireways. Maintain a physical clearance of at least 100 mm from high-voltage AC wires and industrial motor drive conductors to block inductive noise coupling.
- Enclosure Climate Controls: Secure the card inside an IP 54 rated industrial panel that regulates moisture condensation and prevents conductive particulate pollution from contacting the open trace structures.
Additional Information
- 100% Genuine Parts: All products are original and authentic, ensuring reliable industrial performance.
- 30-Day Refund Guarantee: Return any in-stock item within 30 days in original, unopened packaging for a full refund (excluding shipping and fees).
- 12-Month Warranty: Covers defects in materials or workmanship; excludes misuse, normal wear, or unauthorized modifications.
- Worldwide Shipping: We ship via USPS, UPS, FedEx, and DHL. Delivery times vary by country and may be subject to customs or import fees.
- Support & Contact: Technical and warranty assistance is available anytime. Contact us here: Contact.
- Purchase Guidance: Check product specifications and compatibility carefully before ordering to ensure proper application.
Tech & Buying Guide
Industrial Networking Essentials: Demystifying Hubs, Switches, and Routers in Control Systems
Industrial automation relies heavily on robust networking infrastructure to connect programmable logic controllers (PLCs), distributed control systems (DCS), and human-machine interfaces (HMIs). Modern factory automation environments generate vast amounts of real-time operational data across deterministic networks. Understanding the structural differences between hubs, switches, and routers ensures optimal traffic segmentation, minimizes latency, and maintains high network availability.
Safety Relays in Industrial Automation: Fundamentals, Design Standards, and Fail-Safe Architecture
Safety relays form the bedrock of functional safety in modern factory automation, preventing catastrophic equipment failure and protecting plant personnel. While standard electromechanical relays handle basic load switching, they lack the redundant diagnostics required for high-risk industrial environments. Modern industrial automation platforms—including programmable logic controllers (PLCs) and distributed control systems (DCS)—rely on specialized safety relays to monitor field devices and isolate hazards instantly.
Voice-Activated Industrial Automation: Integrating Speech Control into PLC and DCS Architectures
Industrial automation integrates speech recognition, IIoT protocols, and NLP with PLCs and DCS to streamline operations. By leveraging advanced edge computing, engineers enable real-time, hands-free control—allowing personnel to manage smart factory processes safely away from hazardous equipment.