Product Details
The ABB DSTC 452 5751017-A, also cataloged as the DSTC 452 FSK-Modem, operates as a dedicated hardware component for serial I/O bus signal modulation over coaxial cable networks within ABB Advant Master process control systems.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | DSTC 452 (5751017-A) |
| Brand | ABB |
| Origin | Sweden |
| Weight | 1.1 kg |
| Dimensions | 260 mm x 365 mm x 75 mm |
| Operating Temp | 0 to 55 deg C |
| Power Consumption | System backplane supply with integrated 200 mA fuse (3BSC770001R137) |
| Physical Interface | Coaxial cable connection via 3-pos plug (2664197-3) and 10-pos plug (2664193-10) |
| Modulation Type | Frequency-Shift Keying (FSK) |
| Product Type | Communication Module / FSK-Modem |
| Exchange Number | EXC5751017-A |
Backplane Bus Communication Velocity and Firmware Flash Compatibility
The DSTC 452 modem translates high-frequency serial I/O bus data via FSK modulation without reducing backplane bus communication velocity across the host controller rack. Integrated hardware filters isolate noise transients on connected coaxial transmission lines to maintain signal integrity during real-time bus arbitration. Standardized firmware flash compatibility across ABB Advant Master control nodes ensures synchronized scan timing, fast packet conversion, and deterministic I/O density scaling.
Frequently Asked Questions
Q: What fuse rating protects the internal power distribution circuit of the DSTC 452?
A: The module incorporates a 200 mA fast-acting fuse (part number 3BSC770001R137) for internal overcurrent protection.
Q: What cable media and physical connectors are required to interface with the DSTC 452?
A: The unit connects to serial I/O bus networks via coaxial cable utilizing a 3-position plug (2664197-3) and a 10-position plug (2664193-10).
Q: Can the DSTC 452 modem be inserted or removed while the host rack backplane is energized?
A: Power to the specific rack subrack must be isolated prior to replacing the modem to prevent electrical transients across the serial I/O bus connectors.
Field Installation Guidelines
- De-energize control power to the Advant Master subrack before installing or removing the DSTC 452 module.
- Confirm the 200 mA fuse (3BSC770001R137) is intact before sliding the board into the subrack slot guide rails.
- Seat the rear edge connector firmly into the backplane motherboard socket and tighten front panel retaining screws.
- Attach the coaxial cable connectors (3-position plug 2664197-3 and 10-position plug 2664193-10) to their respective terminals.
- Verify coaxial shield grounding continuity at the panel earth bar to prevent high-frequency signal interference.
Additional Information
- 100% Genuine Parts: All products are original and authentic, ensuring reliable industrial performance.
- 30-Day Refund Guarantee: Return any in-stock item within 30 days in original, unopened packaging for a full refund (excluding shipping and fees).
- 12-Month Warranty: Covers defects in materials or workmanship; excludes misuse, normal wear, or unauthorized modifications.
- Worldwide Shipping: We ship via USPS, UPS, FedEx, and DHL. Delivery times vary by country and may be subject to customs or import fees.
- Support & Contact: Technical and warranty assistance is available anytime. Contact us here: Contact.
- Purchase Guidance: Check product specifications and compatibility carefully before ordering to ensure proper application.
Tech & Buying Guide
Safety Relays in Industrial Automation: Fundamentals, Design Standards, and Fail-Safe Architecture
Safety relays form the bedrock of functional safety in modern factory automation, preventing catastrophic equipment failure and protecting plant personnel. While standard electromechanical relays handle basic load switching, they lack the redundant diagnostics required for high-risk industrial environments. Modern industrial automation platforms—including programmable logic controllers (PLCs) and distributed control systems (DCS)—rely on specialized safety relays to monitor field devices and isolate hazards instantly.
Voice-Activated Industrial Automation: Integrating Speech Control into PLC and DCS Architectures
Industrial automation integrates speech recognition, IIoT protocols, and NLP with PLCs and DCS to streamline operations. By leveraging advanced edge computing, engineers enable real-time, hands-free control—allowing personnel to manage smart factory processes safely away from hazardous equipment.
Modern Industrial Automation: Transforming Safety and Efficiency in Mining Operations
Industrial automation has evolved from a simple manufacturing tool into the operational backbone of high-risk sectors. Modern mining operations increasingly rely on advanced control systems, programmable logic controllers (PLCs), distributed control systems (DCS), and artificial intelligence to address deep-underground hazards. By replacing manual labor in high-risk zones, factory automation technologies protect personnel while significantly boosting operational throughput.