{"product_id":"emerson-5x00226g03-i-o-interface-controller","title":"Emerson 5X00226G03 I\/O Interface Controller","description":"\u003cp\u003eConfigured for high-performance signal processing in Ovation control network platforms, the \u003cstrong\u003eEmerson 5X00226G03\u003c\/strong\u003e (\u003cstrong\u003e5X00226G03\u003c\/strong\u003e) I\/O Interface Controller provides direct physical execution of analog and digital signal translation. The unit functions as a high-capacity power regulation and interface module, facilitating robust data throughput and diagnostic monitoring between field devices and the system backplane.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003e5X00226G03\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eEmerson\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e5 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e230 mm x 150 mm x 70 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e-40 deg C to +70 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003e600 W (25 A at 24 VDC output)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput Voltage\u003c\/td\u003e\n\u003ctd\u003e180 VAC to 265 VAC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProtection Class\u003c\/td\u003e\n\u003ctd\u003eIP65\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eProcess Control and Signal Isolation\u003c\/h3\u003e\n\u003cp\u003eThe 5X00226G03 module features high-efficiency power conversion architecture, supporting channel-to-channel isolation to prevent ground loop interference in complex control topologies. This electrical isolation maintains measurement accuracy for sensitive 4-20 mA HART loop protocol instruments by minimizing common-mode noise. Furthermore, the design provides integrated filtering to uphold signal integrity, ensuring that transient electrical events on field-side loops do not propagate to the primary control bus.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Can this module operate in parallel to provide increased current capacity?\u003c\/p\u003e\n\u003cp\u003eA: The 5X00226G03 is designed for standalone power regulation. Parallel operation is not supported unless specifically configured with external diode-ORing logic to prevent back-feeding and ensure load sharing between modules.\u003c\/p\u003e\n\u003cp\u003eQ: Is this unit compatible with hot-swap maintenance procedures?\u003c\/p\u003e\n\u003cp\u003eA: Due to the high power rating of 600 W and the nature of the AC input stage, hot-swapping is not permitted. The module must be electrically isolated from both the AC supply and the DC backplane load prior to physical removal to prevent arcing and terminal damage.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting\u003c\/strong\u003e: Secure the unit to a rigid, flat surface using the integrated mounting chassis. Ensure that the IP65-rated enclosure maintains a seal against environmental ingress by verifying all cable glands and gaskets are properly seated.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrounding\u003c\/strong\u003e: Terminate the protective earth conductor to the designated chassis grounding stud. Use a low-impedance connection to the cabinet earth bus to ensure effective surge voltage protection and electromagnetic compatibility.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWiring\u003c\/strong\u003e: Maintain strict separation between high-voltage AC input wiring and low-voltage DC signal lines to minimize inductive crosstalk. Use appropriately rated shielded cabling for all field I\/O connections, grounding shields at the cabinet entry point only.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVerification\u003c\/strong\u003e: Prior to system integration, measure the output voltage at the terminal blocks using a calibrated digital multimeter. Verify the 24 VDC output is within tolerance and that input voltage stability is maintained under the intended load profile.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EMERSON","offers":[{"title":"Default Title","offer_id":52934472532277,"sku":"5X00226G03","price":66.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0973\/7630\/5461\/files\/5X00226G02_890dfd08-c9b4-4b2f-957a-b18e8506f812.png?v=1779962206","url":"https:\/\/www.5gplc.com\/pt\/products\/emerson-5x00226g03-i-o-interface-controller","provider":"High Five PLC Solution Limited","version":"1.0","type":"link"}