{"product_id":"woodward-5466-340-netcon-5000-f-o-transceiver-module","title":"Woodward 5466-340 NetCon 5000 F\/O Transceiver Module","description":"\u003cp\u003eConfigured for optical signal conversion in NetCon 5000 network systems, the \u003cstrong\u003eWoodward 5466-340\u003c\/strong\u003e (\u003cstrong\u003e5466-340\u003c\/strong\u003e F\/O Transceiver Module) provides direct physical\/electrical execution.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003e5466-340\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eWoodward\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003eApprox. 0.6 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003eStandard NetCon rack-mount module\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e-20 deg C to +55 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003e\u0026lt; 10 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePorts\u003c\/td\u003e\n\u003ctd\u003e2 x RX, 2 x TX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignal Conversion\u003c\/td\u003e\n\u003ctd\u003eElectrical to Optical \/ Optical to Electrical\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eActuator Loop Feedback Response\u003c\/h3\u003e\n\u003cp\u003eThe 5466-340 manages the transduction of high-speed data signals between electrical backplane logic and optical transmission media. This conversion is integrated within the governor control loop to facilitate real-time telemetry exchange across extended transmission distances. The module maintains signal fidelity during conversion, ensuring that the actuator loop feedback response remains synchronized with host processor setpoints. Thermal heat sink dissipation profiles integrated into the internal module architecture ensure stability for the high-speed optoelectronic components during continuous data traffic cycles.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Does the 5466-340 require specific fiber optic cable types for optimal performance?\u003c\/p\u003e\n\u003cp\u003eA: The module is designed for standard multi-mode or single-mode fiber interfaces as specified by the system installation requirements. Ensure the fiber core size matches the transceiver port rating to maintain low insertion loss.\u003c\/p\u003e\n\u003cp\u003eQ: Is the 5466-340 capable of hot-swapping within the NetCon 5000 rack?\u003c\/p\u003e\n\u003cp\u003eA: No. All power must be removed from the rack before insertion or extraction to avoid damaging the electrical backplane connector pins or the internal optical circuitry.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003ePower down the NetCon 5000 system and ensure all chassis power supplies are isolated.\u003c\/li\u003e\n\u003cli\u003eClean the fiber optic connector end-faces with an approved fiber cleaning solution before insertion into the RX\/TX ports.\u003c\/li\u003e\n\u003cli\u003eSlide the module into the designated rack slot, ensuring the backplane connector seats fully without force.\u003c\/li\u003e\n\u003cli\u003eSecure the front-panel mounting screws to ensure the module is properly grounded to the chassis and resistant to mechanical vibrations.\u003c\/li\u003e\n\u003cli\u003eVerify that the fiber optic cable radius of curvature exceeds the minimum manufacturer specification to prevent signal attenuation and fiber fracture.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Woodward","offers":[{"title":"Default Title","offer_id":53008950591797,"sku":"5466-340","price":66.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0973\/7630\/5461\/files\/5466-340.png?v=1781679265","url":"https:\/\/www.5gplc.com\/products\/woodward-5466-340-netcon-5000-f-o-transceiver-module","provider":"High Five PLC Solution Limited","version":"1.0","type":"link"}