{"product_id":"triconex-3636r-relay-output-module","title":"Triconex 3636R Relay Output Module","description":"\u003cp\u003eConfigured for discrete signal switching in Tricon safety system platforms, the \u003cstrong\u003eTriconex 3636R\u003c\/strong\u003e (\u003cstrong\u003e3636R\u003c\/strong\u003e Relay Output Module) provides direct physical\/electrical execution of 32 non-commoned relay outputs.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003e3636R\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eTriconex\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003eStandard Tricon module form factor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003eIndustrial standard range\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePoints\u003c\/td\u003e\n\u003ctd\u003e32, non-commoned\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage Range\u003c\/td\u003e\n\u003ctd\u003e125 VAC\/VDC maximum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCurrent Load\u003c\/td\u003e\n\u003ctd\u003e2 A maximum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eFail-Safe State Execution and Output Logic\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eTriconex 3636R\u003c\/strong\u003e is utilized for applications requiring non-triplicated relay output switching. As a non-TMR (Triple Modular Redundant) component, the module relies on the system's internal output processing logic to initiate contact state changes. The module supports a minimum permissible load of 10 mA at 5 VDC to ensure reliable contact wetting and minimize oxidation on the relay interface. In accordance with safety system design standards, the 3636R is configured for fail-safe state execution; upon the loss of communication with the logic solver or internal fault detection, the relay contacts transition to a pre-defined safe state to isolate the field-side load.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Does the 3636R support hot-swapping during active system operation?\u003c\/p\u003e\n\u003cp\u003eA: The 3636R module is designed for hot-swap capability within the Tricon chassis. Verify that the relay load is de-energized or in a safe state before module extraction to prevent arcing at the backplane or output terminals.\u003c\/p\u003e\n\u003cp\u003eQ: How should the non-commoned outputs be configured for external loads?\u003c\/p\u003e\n\u003cp\u003eA: The non-commoned architecture allows each of the 32 points to switch independent voltage loops. Users must ensure that the voltage and current at each relay contact remain within the 125 VAC\/VDC and 2 A maximum limits to prevent contact fusion.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eEnsure the module is compatible with the physical slot configuration of the chassis backplane.\u003c\/li\u003e\n\u003cli\u003eAlign the module carefully with the chassis rails to avoid pin damage, then apply firm pressure until the connector is fully seated.\u003c\/li\u003e\n\u003cli\u003eSecure the front-panel captive screws to ensure a solid electrical ground connection to the chassis frame.\u003c\/li\u003e\n\u003cli\u003eRoute field wiring for each non-commoned relay circuit through separate conduits if required by voltage segregation standards to prevent cross-circuit coupling.\u003c\/li\u003e\n\u003cli\u003ePerform a functional verification test of all 32 relay contact states following installation to confirm correct logic mapping and field device response.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Triconex","offers":[{"title":"Default Title","offer_id":53032138637621,"sku":"3636R","price":66.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0973\/7630\/5461\/files\/3504E_638f030b-8504-4a41-a87e-5591da7dbcfd.png?v=1782293486","url":"https:\/\/www.5gplc.com\/products\/triconex-3636r-relay-output-module","provider":"High Five PLC Solution Limited","version":"1.0","type":"link"}