{"product_id":"spipt800-infi-net-to-pn800-transfer-module-abb","title":"SPIPT800 INFI-Net to PN800 Transfer Module | ABB","description":"\u003cp\u003eThe \u003cstrong\u003eABB SPIPT800\u003c\/strong\u003e, also cataloged as the \u003cstrong\u003eSPIPT800\u003c\/strong\u003e Communication Module, operates as a dedicated hardware component for protocol translation and data bridging within INFI 90 and Symphony Plus automation network platforms. The module establishes direct communication paths between INFI-Net loop networks and Plant Network 800 (PN800) Ethernet buses to maintain deterministic signal exchange across control layers.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eSPIPT800\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eABB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e139.7 mm x 88.9 mm x 215.9 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e0 deg C to +70 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003eSystem Backplane Powered\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModule Type\u003c\/td\u003e\n\u003ctd\u003eCommunication \/ Transfer Module\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRedundancy\u003c\/td\u003e\n\u003ctd\u003eCable Redundant Pair (Requires SPK800-RCL1)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSystem Compatibility\u003c\/td\u003e\n\u003ctd\u003eINFI 90 \/ Symphony Plus PN800 Architecture\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eBackplane Bus Communication Velocity \u0026amp; I\/O Density Scaling\u003c\/h3\u003e\n\u003cp\u003eThe SPIPT800 transfer module optimizes backplane bus communication velocity by buffering and routing cyclic data frames between legacy INFI-Net nodes and PN800 subnets. Its system architecture scales I\/O density across distributed nodes without degrading loop response times. Integrated firmware flash compatibility ensures synchronized parameter mapping and deterministic packet transfer rates across attached process controllers.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: What hardware component is required to establish a redundant SPIPT800 installation?\u003c\/p\u003e\n\u003cp\u003eA: Redundant SPIPT800 module pairs require the SPK800-RCL1 redundancy cable to establish high-speed synchronization between primary and backup units.\u003c\/p\u003e\n\u003cp\u003eQ: How does the SPIPT800 handle module power sourcing?\u003c\/p\u003e\n\u003cp\u003eA: The module draws operating power directly from the mounting chassis backplane bus logic rails, eliminating the need for external power connections to the module fascia.\u003c\/p\u003e\n\u003cp\u003eQ: Can the SPIPT800 operate in non-redundant standalone configurations?\u003c\/p\u003e\n\u003cp\u003eA: Yes. The module can function as a single standalone transfer interface, provided the redundancy link port remains unpopulated and standard bus termination is applied.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003cp\u003eObserve the following engineering guidelines during installation and maintenance:\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eChassis Mounting: Insert the SPIPT800 module firmly into the designated rack slot along the enclosure guide rails until the backplane connectors fully seat. Tighten front panel retaining screws.\u003c\/li\u003e\n\u003cli\u003eRedundancy Cable Connection: For dual redundant pairs, connect the SPK800-RCL1 redundancy cable between the dedicated sync ports on both primary and secondary SPIPT800 modules.\u003c\/li\u003e\n\u003cli\u003eNetwork Shield Grounding: Ensure all communication cable drain wires and shields are grounded at the enclosure entry point to prevent high-frequency noise insertion.\u003c\/li\u003e\n\u003cli\u003eHot-Swap Constraints: Before removing or replacing a module, confirm that redundant data paths are active and synchronized to prevent process communication interruptions.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"ABB","offers":[{"title":"Default Title","offer_id":53434314817845,"sku":"SPIPT800","price":66.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0973\/7630\/5461\/files\/SPIPT800.png?v=1788159404","url":"https:\/\/www.5gplc.com\/products\/spipt800-infi-net-to-pn800-transfer-module-abb","provider":"High Five PLC Solution Limited","version":"1.0","type":"link"}