{"product_id":"ret650-abb-relion-650-series-transformer-protection-ied","title":"RET650 ABB Relion 650 Series Transformer Protection IED","description":"\u003cp\u003eConfigured for internal fault detection and thermal safeguarding in Relion 650 automation architectures, the \u003cstrong\u003eABB RET650 Rev-A\u003c\/strong\u003e (\u003cstrong\u003eRET650\u003c\/strong\u003e Transformer Protection IED) provides direct physical\/electrical execution. The hardware executes biased transformer differential protection, restricted earth fault (REF) tracking, overcurrent evaluation, and thermal overload calculation. It processes analog current and voltage transformer signals to trip circuit breakers via binary output contacts and communicates via standard substation protocols.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eRET650 (Rev-A)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eABB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eSweden\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003eStandard 19-inch subrack form factor (1\/2 or 1\/1 19-inch width options)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e-10 to +55 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003eAuxiliary power supply dependent (nominal 110-250 VDC \/ 100-240 VAC)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProtection Elements\u003c\/td\u003e\n\u003ctd\u003eDifferential (ANSI 87T), Restricted Earth Fault (ANSI 87N), Overcurrent (ANSI 50\/51), Thermal Overload (ANSI 49), Voltage\/Frequency (ANSI 27\/59\/81)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCommunication Protocols\u003c\/td\u003e\n\u003ctd\u003eIEC 61850, Modbus RTU\/TCP, DNP3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBinary I\/O Capability\u003c\/td\u003e\n\u003ctd\u003eConfigurable optical isolated inputs and heavy-duty output relay contacts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eFirmware Flash Compatibility and Protocol Execution\u003c\/h3\u003e\n\u003cp\u003eThe unit runs embedded deterministic firmware designed to process 16 samples per cycle for protective algorithm computation. Protocol execution for IEC 61850 GOOSE messaging and sampled values is handled directly on the main processor board to maintain latency limits under 10 ms for critical trip commands. Firmware flash memory compatibility ensures parameter setting banks, fault disturbance records, and event logs remain intact during complete auxiliary power interruption. Ethernet and serial bus interfaces provide independent channel processing to prevent network traffic spikes from interrupting protective algorithm scan cycles.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: How does the unit handle current transformer (CT) ratio matching for differential protection?\u003c\/p\u003e\n\u003cp\u003eA: CT ratio and vector group matching are executed internally via software parameter settings within the firmware, eliminating the need for external interposing current transformers.\u003c\/p\u003e\n\u003cp\u003eQ: What communication protocols are natively supported for SCADA integration?\u003c\/p\u003e\n\u003cp\u003eA: The IED natively supports IEC 61850, DNP3, and Modbus protocols over Ethernet or serial interfaces for integration into substation automation networks.\u003c\/p\u003e\n\u003cp\u003eQ: What safety measure prevents CT secondary circuit opening during maintenance?\u003c\/p\u003e\n\u003cp\u003eA: Terminal block assemblies for current inputs feature built-in short-circuiting mechanisms that engage prior to disconnect to prevent high-voltage open-circuit hazards.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eCT Secondary Circuit Handling: Verify that all current transformer secondary circuits are shorted prior to connecting or disconnecting wiring at the rear terminal blocks of the IED.\u003c\/li\u003e\n\u003cli\u003eGrounding Requirements: Connect the dedicated chassis grounding lug directly to the station earth bus bar using a green\/yellow copper conductor with a minimum cross-section of 6 mm sq.\u003c\/li\u003e\n\u003cli\u003eCable Shielding: Terminate all communication and signal cable shields at a single ground point at the panel entry to prevent ground circulating currents and high-frequency interference.\u003c\/li\u003e\n\u003cli\u003eClearance and Cooling: Maintain a minimum of 100 mm vertical clearance above and below the subrack casing to allow unhindered convective thermal heat dissipation.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"ABB","offers":[{"title":"Default Title","offer_id":53256886288693,"sku":"RET650","price":66.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0973\/7630\/5461\/files\/RET650.png?v=1786065913","url":"https:\/\/www.5gplc.com\/products\/ret650-abb-relion-650-series-transformer-protection-ied","provider":"High Five PLC Solution Limited","version":"1.0","type":"link"}