{"product_id":"is215vcmih2b-ge-vme-communication-interface-card","title":"IS215VCMIH2B | GE | VME Communication Interface Card","description":"\u003cp\u003eThe \u003cstrong\u003eGE IS215VCMIH2B\u003c\/strong\u003e, also cataloged as the \u003cstrong\u003eIS215VCMIH2B\u003c\/strong\u003e VME Bus Master Controller, operates as a dedicated hardware component for inter-rack communication and IONet connectivity within Mark VI control platforms.\u003c\/p\u003e\n\u003ch3\u003eSuffix Breakdown \u0026amp; Model Matrix\u003c\/h3\u003e\n\u003cp\u003eThe IS215VCMI module series is categorized by variant versioning defining hardware revision levels. The \u003cstrong\u003eIS215VCMIH2B\u003c\/strong\u003e represents the H2 variant, indicating specific hardware logic and port configuration enhancements compared to the H1 base model.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eIS215VCMIH2B\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eGeneral Electric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003eStandard VME card assembly\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003eMark VI standard VME form factor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003eIndustrial rated range\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003eSystem-bus dependent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnectivity\u003c\/td\u003e\n\u003ctd\u003e3 x IONet, 1 x Serial port\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBus Master\u003c\/td\u003e\n\u003ctd\u003eVME bus master capability\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eProfinet \/ EtherNet\/IP Deterministic Networks\u003c\/h3\u003e\n\u003cp\u003eThe VCMI card maintains backplane bus communication velocity by serving as the VME bus master, effectively arbitrating communication IDs for all modules and associated terminal boards within the control rack. The card manages IONet deterministic network traffic, ensuring that time-critical digital and analog feedback is processed without latency. Firmware flash compatibility is governed by the system-level configuration, allowing the VCMI to synchronize with specific I\/O pack requirements. I\/O density scaling is managed through the controller’s backplane management, where the VCMI identifies and registers terminal board configurations via the J301 interface to maintain deterministic performance.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Does the IS215VCMIH2B support hot-swapping within the VME rack?\u003c\/p\u003e\n\u003cp\u003eA: No. The VME rack must be de-energized prior to the removal or installation of the VCMI card to prevent backplane bus collisions or damage to the communication interface pins.\u003c\/p\u003e\n\u003cp\u003eQ: What is the function of the \"Run\/Fail\/Status\" LED indicator and reset switch?\u003c\/p\u003e\n\u003cp\u003eA: The indicators provide a real-time diagnostic health check of the VCMI module. The push-button reset switch performs a hard reboot of the controller board; this should only be utilized when the system is in a non-critical or maintenance state.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Carefully insert the VCMI card into the designated VME slot, ensuring the board aligns with the backplane guide rails. Secure the faceplate to the rack frame using the provided screws to ensure structural stability and proper grounding.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnectivity:\u003c\/strong\u003e Connect the three IONet cables and the serial interface cable to the front-facing ports. Confirm all connections are secure and that the cable shielding is properly routed to minimize external noise.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVerification:\u003c\/strong\u003e Observe the LED status indicators (\"TX\", \"RX\", \"CD\") upon power-up to confirm network activity. A \"Run\" status indicates successful initialization and VME bus master synchronization.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnvironment:\u003c\/strong\u003e Verify that the control rack cooling system is operational to maintain the card within the specified temperature limits. Avoid obstructing the faceplate LEDs to ensure diagnostic visibility.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConfiguration:\u003c\/strong\u003e Ensure the rack ID and board addressing are correctly defined within the system software before initiating communication with the remote I\/O terminal boards.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"General Electric","offers":[{"title":"Default Title","offer_id":52938309501237,"sku":"IS215VCMIH2B","price":66.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0973\/7630\/5461\/files\/IS215VCMIH2B.png?v=1780047465","url":"https:\/\/www.5gplc.com\/products\/is215vcmih2b-ge-vme-communication-interface-card","provider":"High Five PLC Solution Limited","version":"1.0","type":"link"}