{"product_id":"is200jpdhg1a-general-electric-high-density-power-distribution-card","title":"IS200JPDHG1A | General Electric | High Density Power Distribution Card","description":"\u003cp\u003eConfigured for power distribution in Mark VI Speedtronic turbine control systems, the \u003cstrong\u003eGeneral Electric IS200JPDHG1A\u003c\/strong\u003e (\u003cstrong\u003eIS200JPDHG1A\u003c\/strong\u003e Power Distribution Card) provides direct electrical execution of protected control power delivery to I\/O packs. This hardware component serves as the primary distribution interface utilized to execute power load management and transient surge suppression across turbine control platform architectures.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eIS200JPDHG1A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eGeneral Electric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003eStandard PCB form factor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003eStandard industrial ambient range\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003e125 V dc input\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCore Performance\u003c\/td\u003e\n\u003ctd\u003e24 varistors; 24 output distribution channels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eBackplane Bus Communication and Deterministic Networks\u003c\/h3\u003e\n\u003cp\u003eThe IS200JPDHG1A functions within the Mark VI control architecture to distribute regulated power to peripheral I\/O packs. The board utilizes an array of twenty-four varistors arranged in three rows to provide transient voltage suppression, ensuring that power distribution remains stable despite upstream fluctuations. Deterministic power delivery is maintained through a daisy-chain capability via the J1 and J1X connectors. When configuring multiple boards in a series, total input current must be constrained to the thermal rating of the primary J1 input plug to avoid degradation of the distribution integrity. Firmware flash compatibility and system power monitoring are managed at the cabinet level; however, the board ensures I\/O density scaling by providing dedicated, protected output channels to individual I\/O packs.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Are the output distribution channels hot-swappable?\u003c\/p\u003e\n\u003cp\u003eA: No. The board serves as a passive power distribution component. All input power (125 V dc) must be isolated at the source before adding or removing connections to the JR1-JR8, JS1-JS8, or JT1-JT8 output plugs to prevent arcing.\u003c\/p\u003e\n\u003cp\u003eQ: What are the restrictions when daisy-chaining multiple IS200JPDHG1A boards?\u003c\/p\u003e\n\u003cp\u003eA: When daisy-chaining via J1 and J1X, the cumulative current draw of all downstream loads must not exceed the maximum current capacity of the first board's J1 input connector. Exceeding this limit will cause thermal failure of the input plug.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting\u003c\/strong\u003e: Secure the PCB using standard standoff hardware. Ensure adequate clearance is maintained around the varistor arrays to prevent heat accumulation during operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWiring\u003c\/strong\u003e: Ensure all wiring complies with Class 1 Division 2, Class 1 Zone 2, and ATEX hazardous location requirements where applicable. Use appropriately rated wire gauge for the 125 V dc supply and ensure all crimp connections on the 2-position and 6-position plugs are mechanically secure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrounding\u003c\/strong\u003e: Terminate the board to a common system ground. In hazardous location installations, follow the specific grounding requirements dictated by UL\/ATEX documentation to ensure the intrinsic safety of the distribution path.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInspection\u003c\/strong\u003e: Periodically verify the integrity of the twenty-four varistors. Replace the module if any varistor shows physical signs of discoloration or cracking, indicating a prior transient surge event that may have exceeded the component rating.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"General Electric","offers":[{"title":"Default Title","offer_id":52983719330101,"sku":"IS200JPDHG1A","price":66.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0973\/7630\/5461\/files\/IS200JPDHG1A.png?v=1781078477","url":"https:\/\/www.5gplc.com\/products\/is200jpdhg1a-general-electric-high-density-power-distribution-card","provider":"High Five PLC Solution Limited","version":"1.0","type":"link"}