{"product_id":"honeywell-82407465-001-tdc-2000-voltage-regulator-card","title":"Honeywell 82407465-001 TDC 2000 Voltage Regulator Card","description":"\u003cp\u003eThe \u003cstrong\u003eHoneywell 82407465-001\u003c\/strong\u003e, also cataloged as the \u003cstrong\u003e82407465\u003c\/strong\u003e Voltage Regulator Card, operates as a dedicated hardware component for stable voltage regulation within Honeywell TDC 2000 controller platform networks. The board monitors incoming power rails and dynamically modulates line delivery to maintain fixed voltage baselines across critical logic buses.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003e82407465-001\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eHoneywell\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003eStandard Rack Card Weight\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003eCompatible with standard TDC 2000 card slots\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e0 to 60 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003eSlot load dependent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatibility\u003c\/td\u003e\n\u003ctd\u003eHoneywell TDC 2000 controller platform\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eHoneywell DCS Channel-to-Channel Isolation Parameters\u003c\/h3\u003e\n\u003cp\u003eThe hardware architecture utilizes physical channel-to-channel isolation circuits to prevent voltage spikes or external fault transients from bridging across adjacent control slots. This isolation framework protects the primary processing backplane from common-mode electrical noise and cross-talk, ensuring that local signal telemetry and distributed reference loops operate within tight, uncorrupted tolerances under varying industrial plant loads.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: What specific physical task does the 82407465-001 perform within the rack assembly?\u003c\/p\u003e\n\u003cp\u003eA: The card acts as a dedicated voltage regulator, actively clamping power fluctuations and outputting consistent voltage distributions to the interconnected TDC 2000 modules.\u003c\/p\u003e\n\u003cp\u003eQ: Can this regulator card be extracted while the controller backplane is under active load?\u003c\/p\u003e\n\u003cp\u003eA: No, the TDC 2000 platform architecture dictates that power must be completely isolated from the target rack section before executing removal or insertion procedures to eliminate the risk of transient bus corruption or arc discharge.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eVerify that the system power supply to the designated slot is entirely shut down and isolated prior to insertion.\u003c\/li\u003e\n\u003cli\u003eAlign the board precisely with the standard vertical card guides in the TDC 2000 chassis to ensure square engagement with the backplane pin assembly.\u003c\/li\u003e\n\u003cli\u003eApply uniform force to slide the board until the rear connectors are seated completely; lock all mechanical retaining tabs to counter low-frequency industrial vibration.\u003c\/li\u003e\n\u003cli\u003eKeep all field wiring shields intact and properly grounded at the single cabinet entry point to prevent external electromagnetic distortion from impacting the regulated power circuit.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Honeywell","offers":[{"title":"Default Title","offer_id":53163788927285,"sku":"82407465-001","price":66.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0973\/7630\/5461\/files\/82407465-001.png?v=1784268618","url":"https:\/\/www.5gplc.com\/products\/honeywell-82407465-001-tdc-2000-voltage-regulator-card","provider":"High Five PLC Solution Limited","version":"1.0","type":"link"}