{"product_id":"honeywell-51401163-100-process-network-modem","title":"Honeywell 51401163-100 Process Network Modem","description":"\u003cp\u003eConfigured for high-speed data interfacing in TDC 3000 and Experion PKS architectures, the \u003cstrong\u003eHoneywell 51401163-100\u003c\/strong\u003e (\u003cstrong\u003e51401163-100\u003c\/strong\u003e) Process Network Modem (PNM) provides direct physical\/electrical execution of communication between control processors and I\/O paddle boards. The module operates as a dedicated hardware component for managing data exchange protocols across distributed control system (DCS) networks.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003e51401163-100\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eHoneywell\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.65 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e13.4 cm x 8.5 cm x 1.5 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003eConsult system technical manual\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003eDependent on host rack backplane\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction\u003c\/td\u003e\n\u003ctd\u003eProcess Network Modem (PNM)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003e4-20 mA HART Loop Protocol and Signal Integrity\u003c\/h3\u003e\n\u003cp\u003eThe 51401163-100 PNM module serves as an interface layer that supports the integrity of process control signals within the DCS environment. While the modem handles high-level network communication, it is designed to operate in systems that frequently utilize the 4-20 mA HART loop protocol for field instrumentation. The PNM maintains strict adherence to signal timing and protocol standards, ensuring that data packets derived from HART-enabled field devices are correctly encapsulated and routed between I\/O paddle boards and the control processor without data collision or transmission latency.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Is the 51401163-100 PNM hot-swappable in an active TDC 3000 cabinet?\u003c\/p\u003e\n\u003cp\u003eA: Hot-swap capability is dependent on the specific revision of the backplane and the local power management configuration. Refer to the system hardware maintenance guide to confirm if the slot supports live insertion without impacting the communication bus.\u003c\/p\u003e\n\u003cp\u003eQ: Can this module be used to convert signals between different generations of Honeywell controllers?\u003c\/p\u003e\n\u003cp\u003eA: The PNM is strictly designed for defined protocol handling within TDC 3000 and Experion PKS architectures. It is not a universal protocol converter and should not be used to bridge disparate network standards outside of the Honeywell specified environment.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRack Mounting\u003c\/strong\u003e: Secure the module into the designated rack-mount slot. Ensure the backplane edge connector is aligned correctly to prevent pin misalignment or damage to the communication bus.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShielding and Grounding\u003c\/strong\u003e: Use shielded communication cabling for all network connections. Terminate the shield at the cabinet ground rail to minimize electromagnetic interference (EMI) that can cause CRC errors or dropped packets on the network.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Integrity\u003c\/strong\u003e: Inspect the interface pins for signs of oxidation or deformation prior to installation. A clean, firm connection is required to maintain the specified data transmission velocity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSegregation\u003c\/strong\u003e: Maintain a physical separation of at least 150 mm between the PNM communication cables and any high-voltage AC or DC power lines to prevent induced signal noise.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Honeywell","offers":[{"title":"Default Title","offer_id":52972374950197,"sku":"51401163-100","price":66.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0973\/7630\/5461\/files\/51401163-100.png?v=1780908082","url":"https:\/\/www.5gplc.com\/products\/honeywell-51401163-100-process-network-modem","provider":"High Five PLC Solution Limited","version":"1.0","type":"link"}