{"product_id":"honeywell-51195199-005-cable-assembly","title":"Honeywell 51195199-005 Cable Assembly","description":"\u003cp\u003eThe \u003cstrong\u003eHoneywell 51195156-300\u003c\/strong\u003e is a different module, so we focus on the core hardware: The \u003cstrong\u003eHoneywell 51195199-005\u003c\/strong\u003e, also cataloged as the \u003cstrong\u003e51195199-005\u003c\/strong\u003e Cable Assembly, operates as a dedicated hardware component for high-frequency coaxial drop data routing within control network environments. The coaxial drop interface establishes point-to-point network links between controller nodes, termination blocks, or active tap units, executing continuous electrical carrier frequency transmission.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003e51195199-005\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eHoneywell\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSeries \/ Module Type\u003c\/td\u003e\n\u003ctd\u003eLegacy Control System \/ Coaxial Drop Cable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.50 kg (1.10 lbs)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e5 meters total length assembly\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e-40 to +70 deg C (Standard physical installation path limit)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003ePassive component (Zero direct power draw)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable Type\u003c\/td\u003e\n\u003ctd\u003eCoaxial drop network cable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eImpedance Control\u003c\/td\u003e\n\u003ctd\u003eFactory matched transmission line standard\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSystem Compatibility\u003c\/td\u003e\n\u003ctd\u003eLegacy Honeywell distributed control networks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eChannel-to-Channel Isolation and Electromagnetic Interference Control\u003c\/h3\u003e\n\u003cp\u003eThe dual-shielded dielectric design of the 51195199-005 provides passive cross-talk suppression and maintains signal boundary definition against adjacent electrical circuits. By utilizing high-coverage braided and foil shields, the coaxial assembly limits high-frequency noise from coupling into industrial process runs. This localized shielding protects the core network data frame from structural degradation, preventing voltage transients from generating common-mode noise across neighboring low-voltage instrumentation loops, such as 4-20 mA HART loop protocol wiring systems inside shared routing trays.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Does the installation or extraction of this coaxial drop cable support live hot-swap procedures without network disruption?\u003c\/p\u003e\n\u003cp\u003eA: No. Disconnecting a drop line directly breaks the impedance chain on active control network trunks. Always isolate the network node or confirm redundant path routing before removing the coaxial termination to prevent data drops or signal reflections.\u003c\/p\u003e\n\u003cp\u003eQ: How does the cable construction manage mechanical stress while maintaining channel-to-channel isolation parameters?\u003c\/p\u003e\n\u003cp\u003eA: The solid dielectric layer keeps the inner conductor centered relative to the outer shield matrix. This constant physical geometry ensures uniform characteristic impedance along the 5 meters run, even when bent within acceptable industrial tray parameters.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eBend Radius Restrictions\u003c\/strong\u003e: Route the 5 meters cable through cable trays ensuring the manufacturer minimum dynamic bend radius is not exceeded. Sharp kinking will permanently warp the internal dielectric layer and degrade signal propagation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Torque Verification\u003c\/strong\u003e: Hand-tighten the BNC or F-type coaxial terminations onto the transceiver tap block, then turn until the locking collar fully engages. Do not use excessive mechanical tools that may strip the thread paths.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhysical Path Isolation\u003c\/strong\u003e: Maintain physical distance between this coaxial transmission line and heavy alternating current power lines or variable frequency drive loops to avoid inductive noise injection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnvironmental Grounding\u003c\/strong\u003e: Ensure the drop cable shield grounds correctly at the tap block termination node. Improper termination grounding breaks the loop isolation, allowing ambient electromagnetic interference to induce packet errors.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Honeywell","offers":[{"title":"Default Title","offer_id":53136603218229,"sku":"51195199-005","price":66.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0973\/7630\/5461\/files\/51195199-005.png?v=1784109057","url":"https:\/\/www.5gplc.com\/products\/honeywell-51195199-005-cable-assembly","provider":"High Five PLC Solution Limited","version":"1.0","type":"link"}