{"product_id":"general-electric-is200erddh1a-exciter-regulator-dynamic-discharge-board","title":"General Electric IS200ERDDH1A Exciter Regulator Dynamic Discharge Board","description":"\u003cp\u003eConfigured for IGBT gate drive control and DC link voltage regulation in EX2100 and Mark VI excitation systems, the \u003cstrong\u003eGeneral Electric IS200ERDDH1A\u003c\/strong\u003e (\u003cstrong\u003eIS200ERDDH1A\u003c\/strong\u003e Exciter Regulator Dynamic Discharge Board) provides direct electrical execution of energy dissipation sequences. This hardware component serves as the primary ERDD interface utilized to execute dynamic discharge control and hardware interlock signaling across excitation control platforms.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eIS200ERDDH1A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eGeneral Electric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.36 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e6U Double-Height PCB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e0 deg C to 60 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003eSystem-dependent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCore Performance\u003c\/td\u003e\n\u003ctd\u003eIGBT Gate Drive; DC Link Regulation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eFirmware Flash Compatibility and Deterministic Networks\u003c\/h3\u003e\n\u003cp\u003eThe IS200ERDDH1A module manages field-side energy regulation through integrated IGBT gate drive logic. In simplex configurations, the board mounts to the ERBP backplane and utilizes the K3 charging relay for hardware interlock control. For redundant deployments, the module operates within the ERRB backplane (M2\/C position), coordinating with the K41 de-excitation relay to ensure fail-safe energy discharge. The module features one onboard RTD temperature tracking channel, scaled 0-140 deg C via a 0-10 VDC loop, providing real-time thermal monitoring to the excitation controller. Firmware flash compatibility is managed via the system control interface, ensuring that gate drive timings and discharge logic remain synchronized with the primary excitation regulator firmware version. High-density backplane bus communication velocity is utilized to ensure that discharge commands are executed with sub-millisecond latency during fault conditions.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Is the IS200ERDDH1A module hot-swappable in an active excitation rack?\u003c\/p\u003e\n\u003cp\u003eA: No. Due to the module's direct interface with DC link voltage regulation and IGBT gate drive circuitry, all system power must be isolated and the DC bus confirmed discharged before attempting module extraction to prevent hardware damage or arc flash.\u003c\/p\u003e\n\u003cp\u003eQ: How does the module handle temperature monitoring?\u003c\/p\u003e\n\u003cp\u003eA: The board features one dedicated RTD input channel that converts sensed temperatures into a 0-10 VDC signal. This signal is processed by the excitation controller to monitor the thermal status of the dynamic discharge components.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting\u003c\/strong\u003e: Ensure the 6U PCB is properly aligned with the ERBP or ERRB backplane slots. Engage the ejector handles fully to ensure the edge connectors are seated against the backplane bus.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrounding\u003c\/strong\u003e: The PCB must maintain a secure connection to the excitation cabinet chassis. Verify that all mounting screws are tightened to provide a stable reference for the DC link voltage measurement circuits.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInterlock Connections\u003c\/strong\u003e: Verify the correct wiring of the K3 (simplex) or K41 (redundant) interlock relays. Loose terminations on these relays will result in a failure of the de-excitation command sequence.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThermal Management\u003c\/strong\u003e: Ensure that cooling air flow through the excitation rack is unobstructed. As a high-energy discharge component, the module relies on convective cooling to maintain operational temperature within the rated 60 deg C limit.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"General Electric","offers":[{"title":"Default Title","offer_id":52983729586485,"sku":"IS200ERDDH1A","price":66.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0973\/7630\/5461\/files\/IS200ERDDH1A.png?v=1781078809","url":"https:\/\/www.5gplc.com\/products\/general-electric-is200erddh1a-exciter-regulator-dynamic-discharge-board","provider":"High Five PLC Solution Limited","version":"1.0","type":"link"}