{"product_id":"fta-e-02-honeywell-digital-output-fta","title":"FTA-E-02 | Honeywell | Digital Output FTA","description":"\u003cp\u003eThe \u003cstrong\u003eHoneywell FTA-E-02\u003c\/strong\u003e, also cataloged as the \u003cstrong\u003eFTA-E-02\u003c\/strong\u003e Field Termination Assembly, operates as a dedicated hardware component for high-density digital output distribution within process control and safety-rated network architectures. The unit provides direct physical termination for 24 channels, facilitating signal routing between controller output modules and field-side final control elements through standardized 56-pin ELCO connectivity.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eFTA-E-02\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eHoneywell\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e125 x 70 x 55 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNumber of Channels\u003c\/td\u003e\n\u003ctd\u003e24 (6 groups of 4)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Voltage\u003c\/td\u003e\n\u003ctd\u003e36 VAC\/50 VDC (Cat 3); 125 VAC\/150 VDC (Cat 2)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Continuous Current\u003c\/td\u003e\n\u003ctd\u003e2 A per channel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eDCS Channel-to-Channel Isolation\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eFTA-E-02\u003c\/strong\u003e utilizes an integrated design to maintain channel-to-channel isolation across its six independent output groups. This isolation prevents electrical faults or surge currents occurring in a single output loop from propagating to adjacent channels or the central controller backplane. By strictly adhering to IEC 1010 standards for overvoltage categories, the assembly ensures that control signals maintain defined integrity levels, reducing the risk of common-mode interference in complex process instrumentation loops.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Can the ELCO connector polarization be reconfigured after the assembly has been installed?\u003c\/p\u003e\n\u003cp\u003eA: Yes, the ELCO socket polarization can be adjusted using the ELCO polarizing tool (part no. 06 1989 02). The socket supports six distinct positions per side. It is recommended to perform this adjustment prior to field cable connection to avoid mechanical damage to the polarization keys.\u003c\/p\u003e\n\u003cp\u003eQ: Are there specific constraints for wiring different voltage levels across the 24 channels?\u003c\/p\u003e\n\u003cp\u003eA: The FTA allows for mixed-voltage connections between the six groups of four channels. However, operators must verify that the wiring configuration complies with the respective overvoltage category limits (Cat 2 or Cat 3) defined in the specifications to prevent dielectric breakdown or insulation failure.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eMount the assembly onto a standard DIN EN rail, ensuring a minimum rail length of 126 mm for secure mechanical fit.\u003c\/li\u003e\n\u003cli\u003eVerify that the ELCO socket polarization key matches the mating cable connector before insertion; failure to align keys may result in bent pins or incomplete contact.\u003c\/li\u003e\n\u003cli\u003eTerminate field devices to the corresponding pins. Ensure that the total continuous current does not exceed 2 A per channel to maintain terminal integrity.\u003c\/li\u003e\n\u003cli\u003eEnsure the DIN rail is bonded to a low-impedance ground path to mitigate electromagnetic interference (EMI).\u003c\/li\u003e\n\u003cli\u003eConfirm correct channel state execution by toggling outputs from the controller and measuring voltage levels at the field terminals with a high-impedance multimeter.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Honeywell","offers":[{"title":"Default Title","offer_id":52975879455029,"sku":"FTA-E-02","price":66.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0973\/7630\/5461\/files\/FTA-E-021.png?v=1780987048","url":"https:\/\/www.5gplc.com\/products\/fta-e-02-honeywell-digital-output-fta","provider":"High Five PLC Solution Limited","version":"1.0","type":"link"}