{"product_id":"emerson-epro-pr6424-000-010-eddy-current-sensor","title":"Emerson EPRO PR6424\/000-010 Eddy Current Sensor","description":"\u003cp\u003eConfigured for non-contact measurement of radial and axial shaft dynamic displacement, position, and speed in rotating machinery, the \u003cstrong\u003eEmerson EPRO PR6424\/000-010\u003c\/strong\u003e (\u003cstrong\u003ePR6424\/000-010\u003c\/strong\u003e Eddy Current Sensor) provides direct physical signal execution. This 16 mm diameter transducer detects shaft surface impedance variations to deliver high-resolution displacement data for real-time monitoring and predictive maintenance diagnostics.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003ePR6424\/000-010\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eEmerson (EPRO)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eSubject to certificate of origin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e~200 grams (Sensor \u0026amp; cable)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003eM18 x 1.5 sleeve thread\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e-35 deg C to +150 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003eDependent on interface converter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMeasurement Range\u003c\/td\u003e\n\u003ctd\u003eStatic +\/- 2.0 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSensitivity\u003c\/td\u003e\n\u003ctd\u003e4 V\/mm (101.6 mV\/mil)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProtection Class\u003c\/td\u003e\n\u003ctd\u003eIndustrial grade\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eEddy-Current Probe Scaling and Rotor Dynamics\u003c\/h3\u003e\n\u003cp\u003eThe measurement accuracy of the \u003cstrong\u003eEmerson EPRO PR6424\/000-010\u003c\/strong\u003e is governed by the electromagnetic interaction between the 16 mm sensor tip and the 42 Cr Mo4 ferromagnetic shaft target. To ensure valid output signals, the transducer must be commissioned at the nominal air gap of 2.7 mm. Consistent gap voltage validation is required to ensure operation within the linear range of the probe, as deviations from target metallurgy or diameter (minimum 80 mm requirement) will result in sensitivity errors. Proper installation must mitigate rotor dynamics effects, with cross-talk suppression achieved by maintaining sufficient separation distance from adjacent inductive sensors to prevent interference with the carrier frequency.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Is the 5-meter cable assembly field-repairable if damaged?\u003c\/p\u003e\n\u003cp\u003eA: No, the cable and transducer are matched at the factory to maintain specific impedance characteristics. Replacing the cable or shortening it will shift the resonance frequency, necessitating factory-level recalibration.\u003c\/p\u003e\n\u003cp\u003eQ: Can the sensor head withstand exposure to high-pressure fluids?\u003c\/p\u003e\n\u003cp\u003eA: Yes, the sensor head is pressure-rated to 10,000 hPa (145 psi). Exceeding this pressure limit risks compromising the hermetic seal of the PEEK sensor tip and internal coil assembly.\u003c\/p\u003e\n\u003cp\u003eQ: How does the sensor handle high surface speeds during operation?\u003c\/p\u003e\n\u003cp\u003eA: The sensor maintains linearity up to a maximum surface speed of 2,500 m\/s. Ensure that the shaft surface quality meets API 670 standards to prevent electrical run-out or noise in the dynamic output.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Utilize the M18 x 1.5 threaded sleeve for installation into a rigid machine housing bracket. Ensure a minimum of 5 full thread engagements to maintain mechanical stability under vibration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShielding:\u003c\/strong\u003e Protect the sensor cable from high-voltage transients by routing through dedicated grounded metallic conduit. Terminate the shield at the monitoring system's instrument ground rail.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGap Setting:\u003c\/strong\u003e Use a non-magnetic feeler gauge to establish the 2.7 mm nominal air gap. Verify output voltage against the system's specification sheet before final tightening of the lock nuts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnvironment:\u003c\/strong\u003e Prevent cable kinking and ensure the Lemo connector is shielded from liquid ingress in accordance with the application's environmental requirements.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"EMERSON","offers":[{"title":"Default Title","offer_id":53011726434613,"sku":"PR6424\/000-010","price":66.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0973\/7630\/5461\/files\/PR6424000-010.png?v=1781773594","url":"https:\/\/www.5gplc.com\/products\/emerson-epro-pr6424-000-010-eddy-current-sensor","provider":"High Five PLC Solution Limited","version":"1.0","type":"link"}