{"product_id":"emerson-eddy-current-sensor-system-con041-pr6423-002-030","title":"Emerson Eddy Current Sensor System | CON041+PR6423\/002-030","description":"\u003cp\u003eThe \u003cstrong\u003eEmerson CON041+PR6423\/002-030\u003c\/strong\u003e, also cataloged as the \u003cstrong\u003eCON041 \/ PR6423\u003c\/strong\u003e Proximity Sensors, operates as a dedicated hardware component for shaft displacement and vibration measurement within Emerson machinery monitoring platforms. The hardware configuration pairs an 8 mm inductive proximity transducer with a 3 m integral cable and a CON041 signal converter module. By generating a high-frequency excitation field across the conductive steel surface, the assembly converts microscopic target gap distance changes directly into conditioned continuous voltage outputs without physical contact.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eCON041+PR6423\/002-030\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eEmerson\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUnited States\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e-35 to +180 deg C (Sensor Head)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003eStandard loop power dissipation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProbe Head Diameter\u003c\/td\u003e\n\u003ctd\u003e8 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable Length\u003c\/td\u003e\n\u003ctd\u003e3 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMeasurement Range\u003c\/td\u003e\n\u003ctd\u003e+\/-2.0 mm dynamic, 0 to 1000 um static\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSensitivity\u003c\/td\u003e\n\u003ctd\u003e7.87 V\/mm (200 mV\/mil)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency Response\u003c\/td\u003e\n\u003ctd\u003eDC to 10 kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTarget Material\u003c\/td\u003e\n\u003ctd\u003eFerromagnetic steel (42CrMo4 standard)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStorage Temperature\u003c\/td\u003e\n\u003ctd\u003e-40 to +200 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePressure Resistance\u003c\/td\u003e\n\u003ctd\u003eUp to 10000 hPa (145 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProbe Tip Material\u003c\/td\u003e\n\u003ctd\u003ePPS (Polyphenylene sulfide)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHousing Material\u003c\/td\u003e\n\u003ctd\u003eStainless steel (SST)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003e4-20 mA HART Loop Protocol \u0026amp; Channel Isolation\u003c\/h3\u003e\n\u003cp\u003eThe CON041 converter circuitry incorporates a 4-20 mA HART loop protocol layer alongside raw gap signal conditioning, providing simultaneously mapped dynamic vibration data and digital diagnostic telemetry over standard field wiring. Galvanic channel-to-channel isolation decouples field sensor potentials from rack monitoring power planes, suppressing common-mode ground loop current interference. Integrated temperature compensation balances thermal drifts across the probe head between -35 to +180 deg C, holding scale factor stability to maintain uniform output sensitivity.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: What is the calibrated scale sensitivity for this probe and converter combination?\u003c\/p\u003e\n\u003cp\u003eA: The calibrated sensitivity is 7.87 V\/mm (200 mV\/mil), aligned for measurement against standard 42CrMo4 ferromagnetic steel targets.\u003c\/p\u003e\n\u003cp\u003eQ: How does pressure exposure affect the sensing head tip assembly?\u003c\/p\u003e\n\u003cp\u003eA: The PPS probe tip and stainless steel housing are rated for pressure resistance up to 10000 hPa (145 psi), preventing fluid ingress at sealing points during high-pressure machine casing operation.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003cp\u003eMaintain an un-obscured metallic clearance zone equal to at least 1.5 times the 8 mm probe tip diameter to prevent surrounding wall geometry from causing false inductance loading. Connect cable shielding to the monitoring rack technical ground bus at a single point only to eliminate earth loop currents. Route the 3 m sensor cable inside grounded metal conduits away from high-voltage motor feeds or variable frequency drives. Torque thread mounting locknuts to standard torque figures and seal external connectors with self-amalgamating tape to protect against fluid ingress.\u003c\/p\u003e","brand":"EMERSON","offers":[{"title":"Default Title","offer_id":53346844541237,"sku":"CON041+PR6423\/002-030","price":66.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0973\/7630\/5461\/files\/CON021913-040_PR6423015-000-CN_1bdad013-388e-4b1d-98c3-32f14f12b20c.jpg?v=1787197283","url":"https:\/\/www.5gplc.com\/products\/emerson-eddy-current-sensor-system-con041-pr6423-002-030","provider":"High Five PLC Solution Limited","version":"1.0","type":"link"}