{"product_id":"emerson-1c31199g04-remote-i-o-module","title":"Emerson 1C31199G04 Remote I\/O Module","description":"\u003cp\u003eConfigured for distributed signal acquisition in Ovation distributed control systems, the \u003cstrong\u003eEmerson 1C31199G04\u003c\/strong\u003e (\u003cstrong\u003e1C31199G04\u003c\/strong\u003e Remote I\/O Module) provides direct physical electrical execution for interfacing field-side instrumentation with central controller architectures. The module functions as a signal processing node, ensuring the conversion and transmission of field data into the Ovation control environment while maintaining environmental compliance for harsh industrial installations.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003e1C31199G04\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eEmerson\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e-40 to 70 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003e24 VDC nominal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShock Resistance\u003c\/td\u003e\n\u003ctd\u003e10 g (11 ms)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHumidity Tolerance\u003c\/td\u003e\n\u003ctd\u003e5 to 95 % non-condensing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eProcess Control Connectivity and Channel Isolation\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003e1C31199G04\u003c\/strong\u003e maintains system integrity through robust galvanic isolation, which is required to prevent ground loops and common-mode noise propagation between the field signal environment and the DCS backplane. The module supports 4-20 mA HART loop protocol diagnostic signals, enabling the controller to retrieve device-level health data. This channel-to-channel isolation architecture ensures that electrical transients occurring on a single I\/O loop do not affect the stability of adjacent channels or the primary communication bus.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions (FAQ)\u003c\/h3\u003e\n\u003cp\u003eQ: Does the 1C31199G04 support hot-swapping within the I\/O rack?\u003c\/p\u003e\n\u003cp\u003eA: Yes, the module is designed for hot-swap capability. Ensure the I\/O chassis backplane power is stable and that the associated controller logic is set to maintenance mode prior to module replacement to avoid process interruptions.\u003c\/p\u003e\n\u003cp\u003eQ: Is this module suitable for installation in Class I Div. 2 environments?\u003c\/p\u003e\n\u003cp\u003eA: Yes, the 1C31199G04 is certified for use in Class I Div. 2 and Zone 2 hazardous area installations. Ensure all wiring methods comply with local electrical codes and that the module is installed within a properly rated enclosure.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eInspect the backplane connectors for pin alignment and cleanliness before mounting the module.\u003c\/li\u003e\n\u003cli\u003eAlign the module with the Ovation chassis rails and press firmly until the locking tabs snap into place, ensuring a positive electrical connection to the bus.\u003c\/li\u003e\n\u003cli\u003eTerminate field wiring at the terminal block, utilizing shielded, twisted-pair cabling to reduce electromagnetic interference (EMI).\u003c\/li\u003e\n\u003cli\u003eBond all cable shields to the cabinet ground bus at the entry point to ensure a low-impedance path for noise discharge.\u003c\/li\u003e\n\u003cli\u003eCheck the status LEDs on the front panel after power-up to confirm the module is performing self-diagnostics and establishing active communication with the controller.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"EMERSON","offers":[{"title":"Default Title","offer_id":52955478950197,"sku":"1C31199G04","price":66.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0973\/7630\/5461\/files\/1C31129G01_4345955b-3c9c-488d-aefd-be552ff421ab.png?v=1780459150","url":"https:\/\/www.5gplc.com\/products\/emerson-1c31199g04-remote-i-o-module","provider":"High Five PLC Solution Limited","version":"1.0","type":"link"}