{"product_id":"emerson-1c31107g01-digital-input-module","title":"Emerson 1C31107G01 Digital Input Module","description":"\u003cp\u003eConfigured for discrete signal acquisition in Ovation control networks, the \u003cstrong\u003eEmerson 1C31107G01\u003c\/strong\u003e (\u003cstrong\u003e1C31107G01\u003c\/strong\u003e Digital Input Module) provides direct physical electrical execution for monitoring binary status signals. The module serves as the primary interface for processing 24 VDC and 48 VDC logic-level inputs from field sensors across the distributed control system architecture.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003e1C31107G01\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eEmerson\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.30 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e250 mm x 150 mm x 30 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e0 to 60 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003e24 VDC \/ 48 VDC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput Type\u003c\/td\u003e\n\u003ctd\u003eDigital Logic (24\/48 V)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eChannel-to-Channel Isolation\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003e1C31107G01\u003c\/strong\u003e incorporates galvanic channel-to-channel isolation to prevent the propagation of transient surges or common-mode electrical noise between discrete input channels. This isolation is necessary to maintain logic state integrity within the control loop, ensuring that electrical faults or high-frequency interference on one field device do not impact the status detection of adjacent channels. The circuitry is designed to reject typical field-side noise, providing a stable binary transition threshold for the controller.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions (FAQ)\u003c\/h3\u003e\n\u003cp\u003eQ: Is this module compatible with both 24 VDC and 48 VDC logic signals without hardware adjustment?\u003c\/p\u003e\n\u003cp\u003eA: The module is specified for 24\/48 V operation; verify that field voltage levels are within the input threshold specifications of the specific board revision to ensure proper state detection.\u003c\/p\u003e\n\u003cp\u003eQ: Does the module support hot-swapping within an active I\/O rack?\u003c\/p\u003e\n\u003cp\u003eA: Yes, the module supports hot-swapping; however, ensure that no active loop power is applied to the terminal block during the insertion or extraction process to prevent potential arcing at the backplane pins.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eEnsure the control rack is powered down or in a non-critical maintenance state before installing the module.\u003c\/li\u003e\n\u003cli\u003eConfirm the backplane slot is free of dust or physical obstructions to ensure a secure electrical connection.\u003c\/li\u003e\n\u003cli\u003eAlign the module with the guide rails and press firmly until the locking mechanism engages to prevent accidental dislodgement from vibration.\u003c\/li\u003e\n\u003cli\u003eTerminate digital input field wiring at the terminal block, ensuring that all conductors are properly ferruled to prevent stray wire strands from creating short circuits.\u003c\/li\u003e\n\u003cli\u003eVerify that field devices are wired to a common reference ground as defined in the system wiring diagrams to maintain consistent signal voltage thresholds.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"EMERSON","offers":[{"title":"Default Title","offer_id":52955249606965,"sku":"1C31107G01","price":66.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0973\/7630\/5461\/files\/1C31107G01.png?v=1780451017","url":"https:\/\/www.5gplc.com\/products\/emerson-1c31107g01-digital-input-module","provider":"High Five PLC Solution Limited","version":"1.0","type":"link"}