{"product_id":"ds200ldcch1ala-general-electric-drive-control-lan-communications-board","title":"DS200LDCCH1ALA | General Electric | Drive Control\/LAN Communications Board","description":"\u003cp\u003eThe \u003cstrong\u003eGeneral Electric DS200LDCCH1ALA\u003c\/strong\u003e, also cataloged as the \u003cstrong\u003eDS200LDCCH1ALA\u003c\/strong\u003e Drive Control\/LAN Communications Board, operates as a dedicated hardware component for multi-processor I\/O coordination and network data exchange within Mark V drive control system platforms.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eDS200LDCCH1ALA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eGeneral Electric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProcessor Architecture\u003c\/td\u003e\n\u003ctd\u003e4 (DCP, LCP, MCP, CMP)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInterface Support\u003c\/td\u003e\n\u003ctd\u003eDLAN+, Genius, CPL, C-Bus\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eIndustrial Control and Drive Systems\u003c\/h3\u003e\n\u003cp\u003eThe DS200LDCCH1ALA utilizes backplane bus communication velocity to synchronize multi-processor I\/O operations. The module facilitates I\/O density scaling by employing four dedicated microprocessors: the DCP for analog\/digital filtering, the LCP for network traffic management, and the MCP\/CMP pair for motor control computations. Firmware flash compatibility supports logic-level adjustments for various protocols, including DLAN+ and Genius interfaces. Integration into DIRECTO-MATIC 2000 systems requires adherence to deterministic network timing; external terminal boards, such as the DS200ADCI, are required for CPL and C-Bus differential signaling to maintain bus integrity.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions (FAQ)\u003c\/h3\u003e\n\u003cp\u003eQ: Are additional hardware modules required for specific bus system compatibility?\u003c\/p\u003e\n\u003cp\u003eA: Yes. When interfacing with Genius, CPL, or C-Bus protocols, an optional DS200ADCI terminal board is required to support the specific physical layer requirements of these differential bus systems.\u003c\/p\u003e\n\u003cp\u003eQ: What is the function of the onboard RESET button?\u003c\/p\u003e\n\u003cp\u003eA: The physical RESET button is provided to clear operational faults and force a processor re-initialization sequence, which is used to recover the module from specific logic hang conditions without a full power cycle.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProcessor Initialization:\u003c\/strong\u003e Upon system activation, verify the DCP and LCP status indicators. If the LCP fails to filter LAN signals, inspect the communication cabling and ensure correct protocol settings via the firmware configuration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComponent Handling:\u003c\/strong\u003e The PCB is treated with conformal coating. Do not apply solvents to the surface during cleaning, as this may degrade the protective layer. Use only ESD-safe brushes for particulate removal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBus Termination:\u003c\/strong\u003e When utilizing C-Bus or CPL interfaces, verify that the differential bus is properly terminated at the end-of-line nodes to prevent signal reflections that can corrupt digital communication.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKeypad Interface:\u003c\/strong\u003e The attachable alphanumeric keypad must be seated firmly onto the board header. Ensure the ribbon cable is routed to prevent strain on the connector pins, as intermittent connections will result in input errors.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"General Electric","offers":[{"title":"Default Title","offer_id":52989340221749,"sku":"DS200LDCCH1ALA","price":66.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0973\/7630\/5461\/files\/DS200LDCCH1AGA2__1_61eef5fc-e37e-463c-8d35-0d69d2d1c716.jpg?v=1781171049","url":"https:\/\/www.5gplc.com\/products\/ds200ldcch1ala-general-electric-drive-control-lan-communications-board","provider":"High Five PLC Solution Limited","version":"1.0","type":"link"}