{"product_id":"bachmann-pcc200-plc-module-memory-card","title":"Bachmann PCC200 PLC Module Memory Card","description":"\u003cp\u003eConfigured for non-volatile data storage in M1 control systems, the \u003cstrong\u003eBachmann PCC200\u003c\/strong\u003e (\u003cstrong\u003ePCC200\u003c\/strong\u003e Memory Module) provides direct physical execution of firmware, application code, and configuration parameter retention.\u003c\/p\u003e\n\u003ch3\u003eSuffix Breakdown \u0026amp; Model Matrix\u003c\/h3\u003e\n\u003cp\u003eThe PCC200 series serves as the standard flash-based storage medium for Bachmann M1 processors. This model is a fixed-capacity 8 MB unit; no hardware-based sub-types or variable storage density configurations exist for this specific catalog number.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003ePCC200\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eBachmann\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eGermany\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003eStandard M1 card slot profile\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e0 to 60 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003e5 V (operating) \/ 12 V (programming)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMemory Capacity\u003c\/td\u003e\n\u003ctd\u003e8 MB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHumidity\u003c\/td\u003e\n\u003ctd\u003e5-95% (non-condensing)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eProfinet \/ EtherNet\/IP Deterministic Networks\u003c\/h3\u003e\n\u003cp\u003eThe PCC200 utilizes the M1 backplane bus to interface with the central processing unit, facilitating data transfer rates defined by the controller backplane bus communication velocity. Upon power-up, the controller initiates a boot sequence to verify the integrity of the stored application code against the physical memory address space. Firmware flash compatibility is strictly enforced; the controller firmware must support the storage protocol of the 8 MB flash media to ensure deterministic loading times. In high-performance loops, the card serves as the primary repository for configuration data, with bus communication optimized to prevent latency during state updates.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Is the memory card hot-swappable during PLC runtime?\u003c\/p\u003e\n\u003cp\u003eA: No. Inserting or removing the PCC200 card while the PLC is powered can result in corruption of the file system or damage to the flash memory interface pins. Ensure the controller is in a power-off state before handling the card.\u003c\/p\u003e\n\u003cp\u003eQ: Why is a 12 V program voltage required if the operating voltage is 5 V?\u003c\/p\u003e\n\u003cp\u003eA: The 12 V source is specifically utilized during flash memory write\/erase cycles to facilitate the physical alteration of the memory cell states.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eHandling: Flash memory modules are susceptible to electrostatic discharge (ESD). Use a grounded wrist strap when handling the PCC200 to prevent damage to the internal integrated circuits.\u003c\/li\u003e\n\u003cli\u003eInsertion: Align the card with the designated memory slot on the processor module. Apply firm, even pressure until the card is fully seated in the connector. Avoid using excessive force, which may misalign the pin headers.\u003c\/li\u003e\n\u003cli\u003eEnvironment: Ensure the operating environment remains within the specified temperature range (0 to 60 deg C). Excessive heat can degrade the longevity of the flash memory cells and lead to data retention failures over time.\u003c\/li\u003e\n\u003cli\u003eStorage: When not in use, store the memory card in an anti-static bag and maintain the environment within the specified storage temperature range (-40 to 85 deg C) to ensure long-term physical integrity.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Bachmann","offers":[{"title":"Default Title","offer_id":53025143816501,"sku":"PCC200","price":66.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0973\/7630\/5461\/files\/PCC200.png?v=1782112703","url":"https:\/\/www.5gplc.com\/products\/bachmann-pcc200-plc-module-memory-card","provider":"High Five PLC Solution Limited","version":"1.0","type":"link"}