{"product_id":"allen-bradley-800t-fxmq24ra7-30-mm-illuminated-push-button","title":"Allen-Bradley 800T-FXMQ24RA7 30 mm Illuminated Push Button","description":"\u003cp\u003eThe \u003cstrong\u003eAllen-Bradley 800T-FXMQ24RA7\u003c\/strong\u003e, also cataloged as the \u003cstrong\u003e800T-FXMQ24RA7\u003c\/strong\u003e Push Button, operates as a dedicated hardware component for operator interface and status signaling within industrial control panels.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003e800T-FXMQ24RA7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eAllen-Bradley\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.15 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e30 mm mounting hole\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperator Type\u003c\/td\u003e\n\u003ctd\u003eMushroom head (push-pull)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eContact Configuration\u003c\/td\u003e\n\u003ctd\u003e1 N.C.L.B. and 1 N.C. block\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage Rating\u003c\/td\u003e\n\u003ctd\u003e24 VAC\/VDC (Dual Input)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eProfinet \/ EtherNet\/IP Deterministic Networks\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003e800T-FXMQ24RA7\u003c\/strong\u003e utilizes standard mechanical contact blocks to interface with local PLC input modules. In systems requiring integration into EtherNet\/IP deterministic networks, these contact outputs are wired to remote I\/O nodes, where signal states are digitized and transmitted. While the device does not communicate directly via industrial protocols, its deterministic switching behavior is required for reliable operator intervention within I\/O density scaling architectures. Firmware flash compatibility is not applicable, as functionality is governed by physical operator engagement and contact closure.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Does the dual input feature allow for redundant power sources?\u003c\/p\u003e\n\u003cp\u003eA: The dual input 24 VAC\/VDC module allows for connection to two distinct power sources to provide illumination redundancy, ensuring the pilot light remains functional if one supply circuit fails.\u003c\/p\u003e\n\u003cp\u003eQ: Are the contact blocks field-replaceable?\u003c\/p\u003e\n\u003cp\u003eA: Yes. The 800T series contact blocks are modular and can be removed or replaced from the operator assembly to accommodate changes in control logic or to replace worn contacts.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eInstall the operator into a standard 30 mm panel cutout and tighten the mounting nut to ensure a vibration-resistant seal.\u003c\/li\u003e\n\u003cli\u003eVerify that the contact blocks are fully snapped onto the operator base before finalizing panel wiring.\u003c\/li\u003e\n\u003cli\u003eConnect the 24 VAC\/VDC power leads to the lamp module terminals, observing correct polarity if required by specific system design.\u003c\/li\u003e\n\u003cli\u003eRoute contact block wiring away from high-voltage AC paths to prevent induced noise or signal interference on the PLC input signals.\u003c\/li\u003e\n\u003cli\u003eApply ferrules to all stranded wire terminations to ensure secure mechanical contact within the screw terminals of the contact blocks.\u003c\/li\u003e\n\u003cli\u003ePerform a functional test of both the illuminated feedback and the electrical switching state after installation to confirm proper integration with the control system logic.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Allen-Bradley","offers":[{"title":"Default Title","offer_id":52927727272245,"sku":"800T-FXMQ24RA7","price":66.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0973\/7630\/5461\/files\/800T-FXMQ24RA7.png?v=1779869397","url":"https:\/\/www.5gplc.com\/products\/allen-bradley-800t-fxmq24ra7-30-mm-illuminated-push-button","provider":"High Five PLC Solution Limited","version":"1.0","type":"link"}