{"product_id":"abb-ua-c317-ae-hiee300725r0001-interface-card","title":"ABB UA C317 AE HIEE300725R0001 Interface Card","description":"\u003cp\u003eThe \u003cstrong\u003eABB UA C317 AE HIEE300725R0001\u003c\/strong\u003e, also cataloged as the \u003cstrong\u003eUA C317 AE\u003c\/strong\u003e Interface Card, operates as a dedicated hardware component for analog signal conditioning and variable frequency drive (VFD) output modulation within ABB control platforms. The card converts internal control registers into galvanically isolated 0-10 VDC or 0-20 mA analog outputs to command field actuators and speed reference loops. With a signal response latency under 10 ms and +\/-0.1% full scale accuracy, it ensures real-time feedback processing across low-voltage logic interfaces and high-power motor control units.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eUA C317 AE HIEE300725R0001\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eABB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eSwitzerland\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e4.54 kg (10.00 lbs) net\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e100.0 mm x 220.0 mm x 150.0 mm (3.94 in x 8.66 in x 5.91 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e-40 to +70 deg C (Storage: -40 to +85 deg C)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003e~5 W (at 24 VDC nominal supply)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput Options\u003c\/td\u003e\n\u003ctd\u003e0-10 VDC or 0-20 mA analog output\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eResponse Time\u003c\/td\u003e\n\u003ctd\u003e\u0026lt; 10 ms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAccuracy\u003c\/td\u003e\n\u003ctd\u003e+\/-0.1% full scale\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIsolation Voltage\u003c\/td\u003e\n\u003ctd\u003e500 VAC (typical)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eBackplane Bus Communication Velocity and Firmware Flash Compatibility\u003c\/h3\u003e\n\u003cp\u003eThe UA C317 AE module links directly into the system backplane to achieve deterministic signal updating with minimal latency. High backplane bus communication velocity ensures rapid clock synchronization between central processing units and the card's digital-to-analog conversion stages. Non-volatile onboard memory ensures firmware flash compatibility, allowing persistent configuration storage and system software updates across power interruption cycles.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Can the UA C317 AE card be removed or inserted while the system rack is powered?\u003c\/p\u003e\n\u003cp\u003eA: No. System power to the rack backplane and the 24 VDC external supply must be de-energized prior to installing or removing the card to prevent arc erosion on edge contacts and internal logic disruption.\u003c\/p\u003e\n\u003cp\u003eQ: How is galvanic isolation maintained between the field output channels and system logic?\u003c\/p\u003e\n\u003cp\u003eA: The board incorporates internal isolation barriers rated at 500 VAC, preventing high-voltage ground loops and field noise from entering the backplane control bus.\u003c\/p\u003e\n\u003cp\u003eQ: What power source is required to drive the onboard analog conversion circuitry?\u003c\/p\u003e\n\u003cp\u003eA: The module requires an external input voltage of 24 VDC, drawing approximately 5 W under full load operation.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eDisconnect the main 24 VDC supply and verify that all field actuator wiring loops are de-energized prior to card placement.\u003c\/li\u003e\n\u003cli\u003eAlign the module circuit board edges with the chassis slot guides and slide the card inward until the backplane contacts engage fully.\u003c\/li\u003e\n\u003cli\u003eTighten the retaining hardware on the front plate to ensure mechanical stability and establish low-impedance ground connection to the chassis.\u003c\/li\u003e\n\u003cli\u003eRoute 0-10 VDC and 0-20 mA signal wiring separately from AC power cables to prevent inductive noise coupling.\u003c\/li\u003e\n\u003cli\u003eUtilize shielded twisted-pair cables for analog output connections, terminating cable shields at the panel earth bar near the cabinet entry gland.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"ABB","offers":[{"title":"Default Title","offer_id":53224523399477,"sku":"UA C317 AE HIEE300725R0001","price":66.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0973\/7630\/5461\/files\/UAC317AEHIEE300725R0001.png?v=1785308337","url":"https:\/\/www.5gplc.com\/products\/abb-ua-c317-ae-hiee300725r0001-interface-card","provider":"High Five PLC Solution Limited","version":"1.0","type":"link"}