{"product_id":"abb-neta-01-64637193-ethernet-adapter-modules","title":"ABB NETA-01 64637193 Ethernet Adapter Modules","description":"\u003cp\u003eThe \u003cstrong\u003eABB NETA-01 64637193\u003c\/strong\u003e, also cataloged as the \u003cstrong\u003eNETA-01\u003c\/strong\u003e Ethernet Adapter Module, operates as a dedicated hardware component for Ethernet communication and remote monitoring within ABB ACS800 drive networks. The module interfaces with the primary drive logic to route industrial Ethernet traffic at 10\/100 Mbps over a standard RJ45 connector, executing bi-directional signal translation between internal bus logic and external networks.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eNETA-01 64637193\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eABB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eFinland \/ EU\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.46 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e100 mm x 100 mm x 50 mm (3.9 in x 3.9 in x 1.9 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e-20 to +70 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003ePower supply: 24 VDC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput Voltage\u003c\/td\u003e\n\u003ctd\u003e24 VDC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput Voltage\u003c\/td\u003e\n\u003ctd\u003e24 VDC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCommunication Protocol\u003c\/td\u003e\n\u003ctd\u003eEthernet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eData Rate\u003c\/td\u003e\n\u003ctd\u003e10\/100 Mbps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnectors\u003c\/td\u003e\n\u003ctd\u003e1 x RJ45\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrive Compatibility\u003c\/td\u003e\n\u003ctd\u003eABB ACS800 series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eDeterministic Networks and Firmware Flash Compatibility\u003c\/h3\u003e\n\u003cp\u003eThe NETA-01 Ethernet adapter module maintains full firmware flash compatibility across ABB ACS800 control boards, supporting continuous telemetry transmission without impacting drive processing performance. Integrating into 10\/100 Mbps Ethernet networks, the card processes real-time drive speed, torque, and fault status signals. System parameters and network configuration tables are stored in non-volatile flash memory, providing predictable boot times and preventing parameter loss during external power interruptions.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: What physical interface is used to connect the NETA-01 to an Ethernet network?\u003c\/p\u003e\n\u003cp\u003eA: The NETA-01 uses a standard single RJ45 connector supporting 10\/100 Mbps Ethernet communication.\u003c\/p\u003e\n\u003cp\u003eQ: What input power is required to operate the NETA-01 adapter card?\u003c\/p\u003e\n\u003cp\u003eA: The module operates on a 24 VDC external auxiliary power supply.\u003c\/p\u003e\n\u003cp\u003eQ: What drive series directly supports the NETA-01 option module?\u003c\/p\u003e\n\u003cp\u003eA: The NETA-01 is designed for physical and electrical integration with ABB ACS800 series drives.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Isolation Before Mount\u003c\/strong\u003e: Ensure the host drive system is completely powered down and the DC bus capacitors have discharged before installing or removing the adapter module.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMechanical Mounting\u003c\/strong\u003e: Insert the NETA-01 module into its assigned option slot on the ACS800 drive unit. Secure all captive mechanical fasteners to ensure electrical chassis ground contact.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEthernet Cable Routing\u003c\/strong\u003e: Use shielded Category 5e (or higher) Ethernet cables terminated with metallic shielded RJ45 plugs. Route network cables away from three-phase motor leads and high-voltage power lines to avoid electro-magnetic interference.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShield Connection and Grounding\u003c\/strong\u003e: Connect the Ethernet cable shield to the RJ45 jack chassis connection. Ensure the panel earth busbar maintains low-impedance ground straps back to the main enclosure ground plate.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"ABB","offers":[{"title":"Default Title","offer_id":53212669706549,"sku":"NETA-01 64637193","price":66.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0973\/7630\/5461\/files\/NETA-0164637193.png?v=1784878956","url":"https:\/\/www.5gplc.com\/products\/abb-neta-01-64637193-ethernet-adapter-modules","provider":"High Five PLC Solution Limited","version":"1.0","type":"link"}