{"product_id":"abb-dsdx-451-remote-i-o-expansion-unit","title":"ABB DSDX 451 Remote I\/O Expansion Unit","description":"\u003cp\u003eThe \u003cstrong\u003eABB DSDX 451 5716075-K\u003c\/strong\u003e serves as the primary \u003cstrong\u003eDSDX 451\u003c\/strong\u003e Remote In\/Out Expansion Unit utilized to execute discrete signal processing across Advant OCS platforms. This remote assembly manages the physical interfacing of 20 digital input channels operating at 24 VDC and 12 digital output channels rated for 0.1 to 3 A, establishing direct galvanic boundaries between field execution instrumentation and upper-level processor logic.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eDSDX 451 5716075-K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eABB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eSweden \/ Germany (Standard production matrix baseline)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e2.9 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e94.5 mm x 180 mm x 216 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDigital Inputs\u003c\/td\u003e\n\u003ctd\u003e20 channels (24 VDC nominal)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDigital Outputs\u003c\/td\u003e\n\u003ctd\u003e12 channels (0.1 to 3 A capacity range)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFuse Rating\u003c\/td\u003e\n\u003ctd\u003e500 mA (ABB Part No. 56722011-11)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInterface Plugs\u003c\/td\u003e\n\u003ctd\u003e4-position (2664197-4), 2-position (2664193-2), 8-position (2664193-8)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRegulatory Status\u003c\/td\u003e\n\u003ctd\u003eRoHS exemption under directive 2011\/65\/EU scope\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWEEE Category\u003c\/td\u003e\n\u003ctd\u003eSmall Equipment (No external dimension over 50 cm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eRemote I\/O Units\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eProfinet \/ EtherNet\/IP Deterministic Networks and I\/O Density Scaling\u003c\/h3\u003e\n\u003cp\u003eThe internal trace logic of the \u003cstrong\u003eABB DSDX 451 5716075-K\u003c\/strong\u003e regulates switching intervals in synchronization with design-specified backplane bus communication velocity baselines. When localized industrial networks are bridged over to high-level Profinet or EtherNet\/IP deterministic networks, the expansion unit processes digital signal transitions without dropping datagram frames. The 32-channel high-capacity configuration withstands rapid load state updates during intensive I\/O density scaling routines, provided that all modules in the node assembly match the firmware flash compatibility matrices dictated by the central master controller.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Is hot-swapping or live extraction of the interface plugs permitted on the DSDX 451 while power is applied?\u003c\/p\u003e\n\u003cp\u003eA: No. Terminal plugs (including the 4-position, 2-position, and 8-position variations) must not be disconnected while the 24 VDC field voltage or internal logic power is active. Live extraction can generate inductive breaking arcs across pins, causing data corruption, hardware logic faults, or fusing failure on the output circuits.\u003c\/p\u003e\n\u003cp\u003eQ: What actions are required if an internal channel fuse undergoes an overcurrent event?\u003c\/p\u003e\n\u003cp\u003eA: System engineers must isolate the unit, identify the short-circuit condition on the affected field channel loop, and replace the open circuit component strictly with the factory-specified 500 mA fuse (Part No. 56722011-11) to avoid thermal stress or circuit trace degradation.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eMechanical Mounting Stability\u003c\/strong\u003e: Mount the 2.9 kg module securely onto a standard industrial backing plate or enclosure rail system inside a clean, dry cabinet. Ensure adequate structural retention to mitigate vibration-induced mechanical stresses on the terminal connections.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminal Insertion and Wiring\u003c\/strong\u003e: Attach field conductors to the designated 2664197-4, 2664193-2, and 2664193-8 plugs before inserting them into the module receptacles. Ensure proper wire termination tension to minimize high-resistance contact points.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Separation Rules\u003c\/strong\u003e: Route the 24 VDC input lines and high-current 3 A digital output cables inside dedicated low-voltage raceways. Maintain a minimum separation of 100 mm from three-phase AC power feeds or frequency converter lines to suppress EMI coupling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure Grounding\u003c\/strong\u003e: Connect the module framework directly to the central instrument ground bus using a short, low-impedance copper braid to maintain effective surge shielding limits.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"ABB","offers":[{"title":"Default Title","offer_id":53105732256053,"sku":"DSDX451 5716075-K","price":66.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0973\/7630\/5461\/files\/DSDX4515716075-K.png?v=1783500136","url":"https:\/\/www.5gplc.com\/products\/abb-dsdx-451-remote-i-o-expansion-unit","provider":"High Five PLC Solution Limited","version":"1.0","type":"link"}