{"product_id":"abb-ccf-10-modbus-interface-coupling-module","title":"ABB CCF 10 Modbus Interface Coupling Module","description":"\u003cp\u003eThe \u003cstrong\u003eABB CCF10 2MBPS\u003c\/strong\u003e, also cataloged as the \u003cstrong\u003eCCF 10\u003c\/strong\u003e Coupling Module, operates as a dedicated hardware component for protocol conversion and serial data transmission within ABB control and automation networks. The unit manages physical layer signal coupling over a Modbus interface at speeds up to 2 Mbps, facilitating high-speed data frame transfer between controller racks and remote field devices.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eCCF 10 2MBPS (Product ID: EXC788713-2)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eABB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eCommunication Modules\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCommunication Interface\u003c\/td\u003e\n\u003ctd\u003eModbus Interface\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBaud Rate\u003c\/td\u003e\n\u003ctd\u003eUp to 2 Mbps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNet Weight\u003c\/td\u003e\n\u003ctd\u003e1.2 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGross Weight\u003c\/td\u003e\n\u003ctd\u003e1.2 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e0 to +60 deg C (standard panel ambient)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003ePowered via backplane bus connection\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eBackplane Bus Communication Velocity and Firmware Flash Compatibility\u003c\/h3\u003e\n\u003cp\u003eThe coupling module integrates directly with the system rack backplane, leveraging high backplane bus communication velocity to route Modbus registers without introducing transmission latencies. Inter-module communication frames sync deterministically with external Profinet or EtherNet\/IP deterministic networks through host gateway processors. Onboard firmware flash compatibility ensures stable register mapping and parity bit synchronization across various system firmware revisions.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Does the CCF10 module require dedicated external power wiring?\u003c\/p\u003e\n\u003cp\u003eA: No, operating power is drawn directly through the rack backplane connector when properly seated in the subrack chassis.\u003c\/p\u003e\n\u003cp\u003eQ: What transmission rate is supported on the Modbus communication link?\u003c\/p\u003e\n\u003cp\u003eA: The module supports data transfer rates up to 2 Mbps over the dedicated Modbus interface.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eModule Slot Insertion: Align the CCF10 circuit board with the guide rails of the chassis rack and push firmly until the backplane connector fully seats.\u003c\/li\u003e\n\u003cli\u003eFastening: Hand-tighten top and bottom panel retaining screws to secure mechanical alignment and establish chassis earth ground.\u003c\/li\u003e\n\u003cli\u003eCable Termination: Ensure RS-485\/Modbus serial lines utilize proper end-of-line termination resistors to suppress transmission line reflections at 2 Mbps signaling rates.\u003c\/li\u003e\n\u003cli\u003eShield Grounding: Connect communication cable drain wires to the designated panel earth terminal to prevent high-frequency noise interference.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"ABB","offers":[{"title":"Default Title","offer_id":53257252667701,"sku":"CCF 10","price":66.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0973\/7630\/5461\/files\/CCF10.png?v=1786074163","url":"https:\/\/www.5gplc.com\/products\/abb-ccf-10-modbus-interface-coupling-module","provider":"High Five PLC Solution Limited","version":"1.0","type":"link"}