{"product_id":"396352-03-0-emerson-controlwave-digital-input-module","title":"396352-03-0 Emerson ControlWave Digital Input Module","description":"\u003cp\u003eThe \u003cstrong\u003eEmerson 396352-03-0\u003c\/strong\u003e, also cataloged as the \u003cstrong\u003e396352-03-0\u003c\/strong\u003e Digital Input Module, operates as a dedicated hardware component for discrete state signal processing and 4-20 mA current loop monitoring within ControlWave PLC platforms. The hardware accepts 8 independent input channels via integrated local screw terminals, interfacing field contact transitions and current loop signals directly to the local controller bus.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003e396352-03-0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eEmerson\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.91 kg (2.00 lbs)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003eStandard ControlWave I\/O slot envelope\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e-40 to +70 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003eInternal backplane bus powered\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSystem Platform\u003c\/td\u003e\n\u003ctd\u003eControlWave PLC System\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eDigital Input Modules\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChannel Capacity\u003c\/td\u003e\n\u003ctd\u003e8 channels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignal Compatibility\u003c\/td\u003e\n\u003ctd\u003eDiscrete Inputs \/ 4-20 mA loop monitoring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTermination Type\u003c\/td\u003e\n\u003ctd\u003eIntegrated local screw terminal blocks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003e4-20 mA HART Loop Protocol and Channel Isolation\u003c\/h3\u003e\n\u003cp\u003eThe module architecture incorporates galvanic channel-to-channel isolation to prevent potential field ground loop variations from disturbing internal signal processing. When operating alongside 4-20 mA HART loop protocol instruments on the shared system backplane, internal filtering circuits isolate input sampling paths from high-frequency carrier noise. Integrated cold junction compensation and precision resistor networks retain signal linearity and timing accuracy across operating cabinet temperature shifts.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Can the 396352-03-0 module be hot-swapped while the ControlWave backplane is energized?\u003c\/p\u003e\n\u003cp\u003eA: No. Power to the rack base and associated field wiring terminal blocks must be isolated before removing or inserting the module to prevent electrical arcing and backplane communication faults.\u003c\/p\u003e\n\u003cp\u003eQ: How are field wiring shields terminated on the local terminal block assembly?\u003c\/p\u003e\n\u003cp\u003eA: Field wiring shields must bypass signal pins and connect to a single-point enclosure ground bar to preserve opto-isolated noise rejection boundaries.\u003c\/p\u003e\n\u003cp\u003eQ: What indicates an out-of-range or open-circuit input condition on the card?\u003c\/p\u003e\n\u003cp\u003eA: Internal diagnostics evaluate line currents; values falling below defined threshold limits generate a channel fault bit on the backplane bus and light the corresponding channel status indicator.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eDe-energize system backplane bus power and external field loop supplies prior to module insertion.\u003c\/li\u003e\n\u003cli\u003eAlign the circuit board edges with the designated ControlWave rack housing slot guides.\u003c\/li\u003e\n\u003cli\u003eSlide the module into the slot until the rear backplane connectors are fully engaged and lock the retaining latches.\u003c\/li\u003e\n\u003cli\u003eWire field conductors directly to the 8-point local terminal screw block according to assigned channel polarity.\u003c\/li\u003e\n\u003cli\u003eTerminate all cable drain shields at a single system ground bar outside the terminal block to maintain channel-to-channel isolation.\u003c\/li\u003e\n\u003cli\u003eReapply rack power and verify that the module status LED illuminates green, confirming successful backplane initialization.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"EMERSON","offers":[{"title":"Default Title","offer_id":53445440012597,"sku":"396352-03-0","price":66.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0973\/7630\/5461\/files\/396357-02-41__2_180b959e-adbc-4d2d-8379-184d5150feb9.png?v=1788336374","url":"https:\/\/www.5gplc.com\/products\/396352-03-0-emerson-controlwave-digital-input-module","provider":"High Five PLC Solution Limited","version":"1.0","type":"link"}