{"product_id":"1x00416h01-power-supply-module-emerson","title":"1X00416H01 Power Supply Module | Emerson","description":"\u003cp\u003eThe \u003cstrong\u003eEmerson 1X00416H01\u003c\/strong\u003e, also cataloged as the \u003cstrong\u003e1X00416H01\u003c\/strong\u003e Power Supply Module, operates as a dedicated hardware component for power distribution and voltage regulation within Ovation control system architectures. This module provides direct physical electrical execution for converting input power into the stable DC voltages required for rack-mounted I\/O processing units.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003e1X00416H01\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eEmerson\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUnited States\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.8 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e12.0 cm x 5.0 cm x 16.5 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e-20 to 60 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003eNot Specified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003ePlug-in style Power Supply\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eChannel-to-Channel Isolation\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003e1X00416H01\u003c\/strong\u003e incorporates galvanic isolation between input and output stages, preventing electromagnetic interference and transient voltage spikes from reaching the backplane bus. This isolation ensures the stability of the downstream power rails even when localized electrical fluctuations occur within the distribution network. The module supports 4-20 mA HART loop protocol power requirements for field transmitters connected to the associated I\/O modules, maintaining a stable reference potential across all secondary circuits.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions (FAQ)\u003c\/h3\u003e\n\u003cp\u003eQ: Can the 1X00416H01 be hot-swapped while the Ovation control cabinet is energized?\u003c\/p\u003e\n\u003cp\u003eA: Yes, the module supports hot-swap functionality. Ensure that the primary AC\/DC input source is disconnected or isolated prior to module removal to prevent arcing across the backplane connector contacts.\u003c\/p\u003e\n\u003cp\u003eQ: Is this power supply module redundant-capable?\u003c\/p\u003e\n\u003cp\u003eA: The module is designed for use in standard Ovation power configurations; verify that the specific system rack architecture supports power supply load sharing or redundancy before paralleling outputs.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eConfirm that the rack mounting position is clear of debris before seating the module.\u003c\/li\u003e\n\u003cli\u003eAlign the module with the backplane guide rails and press firmly until the mechanical latch engages fully.\u003c\/li\u003e\n\u003cli\u003eConnect the input power supply wiring to the designated terminal block, ensuring that high-voltage input leads are routed separately from low-voltage signal cables to mitigate EMI.\u003c\/li\u003e\n\u003cli\u003eVerify the integrity of the chassis ground connection to the cabinet grounding bus to ensure protection against surge voltages.\u003c\/li\u003e\n\u003cli\u003eMeasure the output voltage at the test points during the power-up sequence to confirm stable operation within the rated DC output range before connecting downstream I\/O loads.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"EMERSON","offers":[{"title":"Default Title","offer_id":52955349352757,"sku":"1X00416H01","price":66.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0973\/7630\/5461\/files\/1X00416H01.png?v=1780454938","url":"https:\/\/www.5gplc.com\/products\/1x00416h01-power-supply-module-emerson","provider":"High Five PLC Solution Limited","version":"1.0","type":"link"}