{"product_id":"1c31125g01-digital-output-card-westinghouse","title":"1C31125G01 Digital Output Card | Westinghouse","description":"\u003cp\u003eConfigured for discrete signal transmission in Ovation control platforms, the \u003cstrong\u003eWestinghouse 1C31125G01\u003c\/strong\u003e (\u003cstrong\u003e1C31125G01\u003c\/strong\u003e Digital Output Card) provides direct physical electrical execution for switching field-side loads. The hardware functions as an interface for driving binary output commands from the controller to external actuators and relay systems.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003e1C31125G01\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eWestinghouse\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUnited States\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.35 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e12.1 cm x 5.1 cm x 16.6 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e-40 to 70 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003e24 VDC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModule Type\u003c\/td\u003e\n\u003ctd\u003eDigital Output Card\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eProcess Instrumentation and Channel Integrity\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003e1C31125G01\u003c\/strong\u003e maintains output stability through integrated channel-to-channel isolation, preventing common-mode electrical noise and transients from propagating between discrete output loops. This isolation is necessary to preserve logic state integrity when driving inductive or capacitive field loads, ensuring that electrical faults on one output channel do not affect adjacent channels. The module facilitates seamless integration with 4-20 mA HART loop protocol diagnostics when deployed in compatible field device configurations, allowing for bi-directional status monitoring of the controlled elements.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions (FAQ)\u003c\/h3\u003e\n\u003cp\u003eQ: Does the 1C31125G01 support hot-swapping within an active Ovation I\/O rack?\u003c\/p\u003e\n\u003cp\u003eA: The module supports hot-swap functionality; ensure that the I\/O chassis backplane power is stable and that no external field voltage is being back-fed into the module output terminals during the replacement process.\u003c\/p\u003e\n\u003cp\u003eQ: Are there restrictions regarding firmware compatibility for this output module?\u003c\/p\u003e\n\u003cp\u003eA: Compatibility is dependent on the Ovation controller firmware version; ensure the system configuration file is updated to recognize the 1C31125G01 hardware ID before attempting communication.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eInspect the backplane connector slot for debris or pin deformation prior to module insertion.\u003c\/li\u003e\n\u003cli\u003eAlign the card with the cabinet guide rails and insert until the connector is firmly seated against the backplane bus.\u003c\/li\u003e\n\u003cli\u003eSecure the module using the top and bottom captive fasteners to prevent mechanical displacement from industrial vibration.\u003c\/li\u003e\n\u003cli\u003eTerminate all output field wiring at the terminal block, utilizing shielded conductors to minimize electromagnetic interference (EMI).\u003c\/li\u003e\n\u003cli\u003eBond the cable shield drain wire to the designated single-point ground bus in the cabinet to prevent the creation of ground loops.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"EMERSON","offers":[{"title":"Default Title","offer_id":52955333886261,"sku":"1C31125G01","price":66.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0973\/7630\/5461\/files\/1C31125G01.png?v=1780454185","url":"https:\/\/www.5gplc.com\/products\/1c31125g01-digital-output-card-westinghouse","provider":"High Five PLC Solution Limited","version":"1.0","type":"link"}